SE-YKL亚克力无振动防滑坡道
SE-YKL Acryklic no vibration slip ramp
特点：
表面粗糙度均匀；起伏不大，无震动；表面阻泥性好；耐磨、耐重压；良好的耐侯性。
Features:
Surface roughness uniformity; undulating, no vibration; surface resistance and good mud;
abrasion resistant to pressure; excellent weather resistance.
施工工艺
Construction Technology
界面黏结层：
用黏结剂与纯水泥拌合后，直接用镘刀施工于混凝土表面，确保素地与抗压层的牢靠结合。
抗压层：
黏结底层干燥后，在用镘刀施工抗压基层。厚度要均匀以确保基底的抗压强度，并使表面平整（厚度约3mm）。
彩色防滑面层：
待抗压层干燥后，以喷涂方式施工面层，利用巨大比表面积达到防滑效果。本层结构耐磨，表面粗糙、均匀，不会造成车辆进出时的震动。
Interfacial adhesion layer:
The pure cement binder and mixing, the direct construction of the concrete with a trowel surface to ensure prime
compressive layer with solid binding.
Compressive layers:
The underlying bond after drying, compression in the grass with a trowel construction. Substrate thickness should be
uniform in order to ensure the compressive strength, and to smooth the surface (thickness of about 3mm).
Colored non-slip surface layer:
Compressive layer to be dried, the surface layer by spraying construction, the use of a huge surface area to achieve non-slip effect. The wear layer structure, surface roughness, uniformity, and out of the vehicle will not cause vibration.
装和建筑装饰(北京)有限公司
电话：400-002-1928 传真：010-67685099
手机：13801201928 闫先生
邮箱：sowabj@sina.com
网址：www.sowabj.com
'
