产品性能
充电器可充4个AA/AAA或2个6F22(9V)镍氢或镍镉可充电池；
恒压小电流充电模式，电池电压充满关断方式，将提高电池的使用寿命；
AA/AAA电池采用两粒电池串联充电方式，对应LED充电指示。
全电压输入，全球适用。
产品参数
输入:100-240V
AC:50/60Hz 50mA ；
输出:2.4VDC*2;200mA;9VDC*2 20mA；
空载功耗： 1W
MAX；
充电满载功耗：5W MAX；
电池充饱率:≥80%；
使用环境:0-35 ℃ 湿度：
≤95％
存储环境:-25～+60℃ 湿度：
≤85％
工作时本体温度:充电时壳体表面温度≤60℃，
电池表面温度≤55℃。
尺寸：100*68*32mm(长*宽*高)
- Product features
a) Can charge 4 pcs AA/AAA Ni-Mh / Ni-CD rechargeable batteries and 2 pcs 9V batteries.
b) LED display the charging process. The LED turns off when fully charged.
c) Short circuit protect: can prevent from short circuit when positive pole connects negative one.
d) Worldwide Voltage, suitable for the whole world.
3. Electric parameter
1、Input：100-240V AC，50/60Hz 50mA；
2、Output：2.4VDC*2 200mA，9VDC*2 20mA；
3、Consume when unloading battery：1W MAX；
4、Consume when all channels loading batteries：5W MAX；
5、Chargingsufficiency of battery：≥80%；
4. Environment condition
1、Using environment: temperature: 0-35℃ humidity: ≤95％
2、Storage environment: temperature: -25～+60℃ humidity: ≤85％
3、Self environment when working: Surface temperature of charger when charging: ≤60℃，
Surface temperature of battery when charging:≤55℃。
5. Safety spec
Accord with safety standard: CE
6. Property
- High temperature test: testing temperature is 65℃±2℃. Product is without packing, lasting time is 5 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.
- Low temperature test: testing temperature is－20℃±3℃. Product is without packing, lasting time is 8 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.
- Constant temperature and humidity test: testing temperature is 40℃±2℃, humidity is 90%～95%. Product is without packing, lasting time is 48 hours. Then put it under normal temperature and humidity until return to normal. Retest the property, all goes well.
- Vibration test: Frequency is10～55HZ, swing is 0.35mm, To every direction 10 cycles. Then put it under normal condition until return to normal. Retest the property, all goes well.
- Floor drop test: Height is 1000mm，desk wood block thickness is 20mm, 6 sides, each side 1 time. After dropping test, the surface and all functions goes well.
