ATC1500-S适用于电源厂生产线测试使用. |
测试速度快，同时可迅速形成测试报表， |
有效的提高了工厂的品质控制能力。 |
|
ATC1500-S
LED驱动电源自动系统
介 绍
适用：150W以下单路输出之充电器，电源适配器，LED驱动电源！
（客户自备电脑+显示器）
概述：
系统结构：测试架(标配)+ATC150主机（内含150W电子负载，功率计模块，示波器模块，AC源）
尺寸：500x450x133mm总体重量：20KG
上图标配的测试治具功能:该治具只具有每次测试一个电源板的功能,左边测试完成后,会转至右侧试,这样左右轮流测试.
★测试LED驱动电源建议客户制作如下治具:
此治具制作要求:
- 当测试连板电源板时,测试完成第一个电源后,治具会自动转至第二个电源板,测试完第三个电源板后会自动转至第四个……..以次完成9连板或10连板测试.
- 客户自己制作治具时,治具开关需具有发出5V的电平信号触发ATC主机开始测试.
- 每个电源板在测试的过程中,其中的DC与AC均需要其它电源板完成隔立开,以保证测试的准确性.即AC与DC均需要用继电器与其它电源板隔立的.
主要功能特点：
1.可以测试150W以内任何单组输出电源，LED电源!
2.图形界面基于Windows XP环境
3.测试程序编辑功能
4.测试项目选择功能（输入/输出/空载/短路
5.欠压/稳压/过载/纹波/效率等功能）
6.统计测试报告（Excel电子档）
7.自动生成CPK等品质报表
8.配置灵活
9.性价比高，适合大中小企业。
10.测试速度快
11.测试不良结果实时打印功能
测试项目：
启动测试(Start-up)
欠压测试(UVLO)
待机测试(Idle)
恒压区测试(Standard CV)
恒流区测试(Standard CC)
LED驱动电源测试（LED）
短路测试(Short Circuit)
过压测试(Over Voltage)
过流测试(Over Current)
线调整(Line Regulation)
负载调整(Load Regulation)
关机测试(Power Down)
支持性测试(Support Function)
Test Name | Parameter and Range(测试项目与量程) | Accuracy |
START UP启动测试 | Inrush current: 0 – 83Apk Startup time: 0 to 32767msec. Output voltage overshoot: 0 – 60Vpk | ±1% (reading + range) ±1ms ±1% (reading + range) |
UVLO欠压测试 | Functional test only, Pass/Fail | N/A |
IDLE待机测试 | Standby input power: 0 – 5/25/250/1250W Standby input current: 0 – 0.1/0.5/5/25Apk Input voltage: 30 – 280V*Note 2 | ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
STANDARD CV (Constant Current and Constant Resistance load)恒流 | CC Mode: 0 – 3/15 A CR Mode: 0.1 – 50Ohm Input Voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 3/15Adc Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV | ±0.15% (setting + range) ±0.3% (setting + range) *Note 2 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
STANDARD CC (Constant Voltage and Constant Resistance load)恒压 | CV Mode: 0 – 15/60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 15Adc Efficiency: 0 – 100% | ±0.15% (setting + range) ±0.3% (setting + range) *Note 3 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
LED Driver Test (LED Load) LED驱动 | Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current reading: 0 – 15Adc Output Average Voltage reading: 0 – 60Vdc Output pulsed current reading (TRIAC, PWM) | ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.1% (reading + range) *Note 4 ±0.05% (reading + range) *Note 4 ±0.5% (reading + range) |
SHORT CIRCUIT
短路测试 | Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current: 0 – 15Adc | ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range) *Note 4 |
OVER CURRENT 过流 | Current trip point: 0 – 3/15Adc Trip point voltage: 0 – 15/60Vdc Wait Time >= 10msec. Wait Time < 10msec. Voltage Before Trip Point: 0 – 15/60Vdc Current Before Trip Point: 0 – 3/15Adc | ±0.1% (reading + range)
±0.05% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
OVER VOLTAGE 过压测试 | OV trip point: 0 – 60V | ±0.1% (reading + range) |
LINEREGULATION 线性调整率 | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
LOAD REGULATION 负载负整率 | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
AVERAGE EFFICIENCY 平均效率 | Efficiency: 0 – 100% | ±0.25% (reading + range) |
I-V CURVE PLOT I-V曲线 | CC Mode: 0 – 3/15 A CC Mode Output Voltage 0 – 15/60Vdc CC Mode Output Current 0 – 3/15Adc CV Mode: 0 – 15/60V CV Mode Output Voltage 0 – 15/60Vdc CV Mode Output Current 0 – 15Adc | ±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) |
POWER DOWN 关机测试 | Holdup time: 0 – 65535 msec. Input voltage: 30 – 300Vrms *Note 1 Output Current 0 – 3/15Adc Output voltage overshoot: 0 – 60Vpk | ±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
Global Setting | Load On Voltage: 0 – 60Vdc Wait Time: 0 – 32767msec. Nominal Output Voltage: 0 – 60Vdc Nominal Output Current: 0 – 15Adc | ±1% (reading + range) ±1ms ±1% (reading + range) ±1% (reading + range) |
Optional Setting支持性功能 | Bias Output Voltage : 0 – 28Vdc RelayStaterated current: 3A | ±0.2% (reading + range) - |
STS带给企业的优势
1.能有效地解决电源产品的功能测试，有效的排除了手工测试产生错误的可能性！
2.能将测试数据完整地形成电子表格，永久存档以便追溯。
3.有效地降低测试成本，为客户赢取更多订单！
详情请登入：
联络方式：013377782881许生
