 | | 
260.00x180.00x40.60 (mm)
10.23x7.08x1.59 (inch) | |
| 
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 Hz
INPUT CURRENT: 6.0 / 3.0 A FOR 115 / 230 VAC
INRUSH CURRENT: 60A / 90A MAX. FOR 115 / 230
VAC PER POWER MODULE | |
|
|
|
 | | Output Voltage | Output Current Min. | Output Current Max. | Output Current Peak | Regulation Load | Regulation Line | Output Ripple &
Noise Max.[P-P] | | +5V | 3 | 25.00 | | ± 5% | ± 1% | 50mV |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | REMARKS: *TOTAL CURRENT OF +5V AND + 3.3V NOT EXCEED 28 A
*TOTAL +5V AND 3.3V AND 12V POWER NOT EXCEED 232 W | 
* TEMPERATURE
RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃ --- 80℃
* HOLD UP TIME: 16 ms
MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGEv * EFFICIENCY: 65% TYPICAL, AT
FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
*
OVER POWER PROTECTION
* OVER VOLTAGE PROTECTION
* OVER CURRENT
PROTECTION
* SHORT CIRCUIT PROTECTION
* EMI NOISE FILTER: FCC CLASS B,
CISPR22 CLASS B
* SAFETY: MEET UL, CSA 60950, TÜV EN-60950
* FAULTY ALARM
METHODS : LED, BUZZER, TTL SIGNAL
* HOT-SWAPPABLE / HOT-PLUGGABLE 1 + 1
REDUNDANCY FUNCTION
* BALANCE LOAD SHARING DESIGN
* REMOTE SENSING
DESIGN
* ISOLATION: BUILT-IN IN THE POWER MODULE
* MEET IEC-1000-3-2 CLASS
D ( ACTIVE PFC )
* COOLING: TWO 40 mm DC FANS
*THE POWER-SUPPLY IS
FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE
COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND
SAFETY-REGULATIONS. |
|
|
|
|
