 | |   | 
340.00422.0043.00 (mm)
13.39x16.61x3.27 (inch) | |
| 
VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT (PER POWER MODULE)：19/8A FOR 115/230VAC
INRUSH CURRENT (PER POWER MODULE)：40/60A MAX. FOR 115/230VAC (25℃) | | |
|
|
|
 | | Output Voltage | Output Current Min. | Output Current Max. | Output Current Peak | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] | | +5V | 1.5 | 60.00 | | ±5% | ±1% | 50mV |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| * TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 380W.
* TOTAL OUTPUT MAX: 1250W. | 
* TEMPERATURE RANGE：OPERATING 0℃～45℃, STORAGE -20℃~80℃
* HOLD UP TIME：16mS IN REGULATOIN LIMIT AT 90VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO frame GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY：>80% AT 115VAC, 30%~100% MAX LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500Ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION：+3.3V→3.9V～4.7V，+5V→5.7V～6.5V ，+12V→12.8 V～13.9V
* OVER CURRENT PROTECTION: +5V,+12V,+3.3V 110~ 160% AT FULL LOAD
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* REMOTE ON / OFF CONTROL
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* COOLING:38*28mm, TWO DC FAN (PER MODULE)
* EMI NOISE FILTER: FCC CLASS B , CISPR 22 CLASS B
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* SAFETY：TO MEET UL, TUV, CB IEC60950
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
|
|
|
|
