垃圾填埋场用高密度聚乙烯土工膜（普通糙面膜）
High density polyethylene geomembrane used in landfill(normal textured geomembrane)
产品介绍:：高密度（HDPE）聚乙烯普通糙面土工膜是由特殊配方的原生树脂，经一定工艺手段生产的单面或双面
具有均匀毛糙外观的高密度聚乙烯（HDPE）土工膜。
Introduction: high density polyethylene(HDPE) textured geomembrane ,made of virgin resin by special
production ,has even and smooth surface on both sides.It is especially designed for flexible geomembrane.
产品规格：厚度1.0～3.0㎜，幅宽4～9m，长度根据工程设计和客户要求。
Specification:thickness ranges from
1.0mm to
3.0mm,width from 4m to 9m.The roll length can be made according
to design or customer request.
产品特点：具有优异的防渗防污性能，机械性能优异，尺寸稳定性、化学稳定性和耐热老化性能良好，同时具有优
异的抗紫外线辐射性能。摩擦系数大，还具有防滑作用，非常适合于垃圾填埋场的四周边坡铺设，便于土工织物的二
次铺设，同时可以增强膜的抗承载变形力。一般应用在边坡膜体表面需要覆土，要求有较大摩擦系数的项目中。
Property: :HDPE normal textured geomembrane has excellent chemical and mechanical property,anti-crack
property,dimensional stablility and anti-aging property,furthermore it can be exposed for anti-UV property.
应用范围：市政环保，环卫防渗工程;水利防渗工程;园林绿化水景防渗工程;冶金石化行业防渗、防腐工程;交通基
础设施的防渗工程;农业水利防渗工程;水产养殖行业。以及其他实施的防渗，防腐，防漏，加固，渗滤液的收集。临
时性容器结构，特殊构件的预制等。
Application:municipal environmental,anti seepage in landscaping and municipal, metallurgy area,anti-corrosion,
transportation infrastructure, agriculture reservoir waterproofing project, fisheries aquaculture. Other facilities
waterproofing,anti erosion,anti seepage,reinforcement and seepage water collecting, preparation of temporary tank
and special structre.
产品性能指标：Product specifications: GB/T17643-2011（GH-2T1型、GH-2T2型） CJ/T234-2006
序号No. | 项目Item | 指 | |||||
1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | ||
1 | 最小密度min density（g/㎝3） | 0.940 | |||||
2 | 拉伸屈服强度（纵横向）yield strength(TD,MD)，N/㎜≥ | 15 | 18 | 22 | 29 | 37 | 44 |
3 | 拉伸断裂强度（纵横向）breaking strength(TD,MD)，N/㎜≥ | 10 | 13 | 16 | 21 | 26 | 32 |
4 | 屈服拉伸应变（纵横向）yield elongation (TD,MD)，%≥ | 12 | |||||
5 | 断裂标称应变（纵横向）breaking elongation (TD,MD)，%≥ | 100 | |||||
6 | 平均直角撕裂强度（纵横向average rectangle tear strength(TD,MD)），≥N | 125 | 156 | 187 | 249 | 311 | 374 |
7 | 抗穿刺强度puncture resistance，N≥ | 267 | 333 | 400 | 534 | 667 | 800 |
8 | 耐环境应力开裂stress crack resistance， h≥ | 300 | |||||
9 | 碳黑含量carbon black content，， % | 2.0～3.0 | |||||
10 | 碳黑分散性carbon black dispersion | 10个数据中9个为1级或2级，3级不多于1个 nine of 10 is grad I or II,less than 1 if grad III | |||||
11
| 氧化诱导时间oxidative induction time（OIT），min | 标准氧化诱导时间standard OIT≥100 | |||||
高压氧化诱导时间high pressure OIT≥400 | |||||||
12 | 80℃烘箱老化（90天后标准OIT保留率）oven aging at80℃(standard OIT retained after 90 days)，%≥ | 55 | |||||
