【Mini Redundant】MRM-6600P |
|
 |
600W |
Server,Workstation,Storage System,Communication,Networking |
|
|
|
|
 | |
254.00x150.00x84.00 (mm)
10.00x5.91x3.31 (inch) | |
|
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 Hz
INPUT CURRENT: 10 / 5 A FOR 115 / 230 VAC
INRUSH CURRENT: 80A / 150A MAX. FOR 115 / 230 VAC PER POWER MODULE | |
|
|
|
| | Output Voltage | Output Current Min. | Output Current Max. | Output Current Peak | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] | | +5V | 1.0 | 28.00 | | +5%,-4% | ± 1% | 50mV |
|
| |
| +12V | 2.0 | 45 | | +5%,-4% | ± 1% | 120mV |
|
| |
| +3.3V | 1.0 | 28 | | +5%,-3% | ± 1% | 50mV |
|
| |
| +5VSB | 0.1 | 2.5 | | +5%,-4% | ± 1% | 50mV |
|
| |
| |
| |
| |
|
‧TEMPERATURE RANGE : OPERATING OPERATING: 0℃ --50℃
STORAGE: -20℃ --- 80℃
‧HUMIDITY:OPERATING:20%-80%, NON-OPERATING:10%-90%
‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE
‧DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 MINUTE
INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
‧EFFICIENCY: 68% TYPICAL, AT FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER LOAD PROTECTION: 110 ~ 150% MAX.
OVER VOLTAGE PROTECTION:
+5V -> 5.7V ~ 6.5V, 3.3V -> 3.9V ~ 4.5V, 12V -> 13.3V~ 14.5V
‧OVER CURRENT PROTECTION : 5V, 12V, 3.3V 130% +/- 20% AT FULL LOAD
-5V, -12V SHORT CIRCUIT
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧SAFETY: MEET UL 60950, CSA 22.2 NO/ 60950, TÜV IEC 60950
‧REMOTE ON / OFF CONTROL
‧FAULTY ALARM METHODS : LED, BUZZER, TTL SIGNAL
‧HOT-SWAPPABLE / HOT-PLUGGABLE REDUNDANCY FUNCTION
‧BALANCE LOAD SHARING DESIGN
‧REMOTE SENSING DESIGN
‧ISOLATION: BUILT-IN IN THE POWER MODULE
‧MEET IEC-1000-3-2 CLASS D ( ACTIVE PFC )
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
|
|
| |
| |
|
|
