主要特点
宽输出电压、电流范围:0-16 Vdc to 0-4000 Vdc和0-7.2Adc to 0-4500 Adc
以标准的宽输入电压、频率范围:
从380 Vac到480 Vac频率:50 Hz和60 Hz
高精度的可编程和监测
高效率:高达88%满载
I/O标准通讯接口:37针电路标准的光隔离的用户I / O界面,无需额外的隔离电路
高效率的运作:高达92%的效率在满载情况下
RS232接口标配(标准SCPI命令):
GPIB,USB,以太网,RS485接口可选
可选以太网LAN接口(LXI-certifiedEthernetcommunications):内嵌web-server
过压过流保护关闭标准(OCT&OVT STD):过压保护和过流保护机械接触器高速断开主输入
可回馈电网选件(MT series):
电能可回馈(PowerCycleAC Grid),自动谐波消除平衡系统,产生(6n±1)-12/18/24/48个脉冲高级的回馈电网技术
IVI驱动程序:多种可视化编程应用可支持Labview,Labwindows/CVI,IVI驱动等
前面板计量校准:界面简洁、显示清晰
Specifications
Input | |
Nominal Voltage | 208 VAC (operating range 187 - 229 VAC) |
Frequency | 50 Hz - 60 Hz (operating range 45 Hz - 66 Hz) |
Power Factor | Greater than 92% at maximum power for 3 phase models |
Environmental | |
Operating Temperature | 0°C to 50°C |
Storage Temperature | -25°C to +85°C |
Ambient Temperature | 0 to 50°C |
Temperature Coefficient | 0.04%/°C of maximum output voltage, 0.06%/°C of maximum output current. |
Air Cooling (Standard) | Side air inlet, rear exhaust |
Water Cooling (Optional) | 25°C maximum inlet temperature |
Physical | |||
Power | Input Phases | Size (H" x W" x D") | Weight |
30 kW | 3Φ | 38½" x 22" x 29" (97.79 x 55.58 x 73.66 cm) | 280 lbs (127.01 kg) |
Output | |
Ripple | See Model Charts |
Line Regulation | Voltage Mode: ± 0.004% of full scale |
Load Regulation | Voltage Mode: ± 0.01% of full scale |
Load Transient Response | 2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change |
Efficiency | ≥ 86%; See Model Charts |
Stability | ± 0.10% for 8 hrs. after 30 min. warmup |
Isolation | User inputs and outputs:referenced to earth ground. |
Maximum Slew Rate | Standard Models: |
Bandwidth | Standard Models: |
Analog Output Impedances | Voltage output monitoring: 100 ohm |
Programming Levels and Accuracy of Full Scale | ||||
Voltage | Current | OVT | OCT | |
Remote Analog Programming Accuracy | ± 0.075% | ± 0.075% | ± 0.075% | ± 0.075% |
Digital Programming Accuracy | ± 0.075% | ± 0.075% | ± 0.075% | ± 0.075% |
Remote Analog Programming Levels | 0 - 10.0 Vdc | 0 - 10.0 Vdc | 0 - 10.0 Vdc | 0 - 10.0 Vdc |
Monitoring Levels and Accuracy of Full Scale | ||
Output Voltage | Output Current | |
Remote Analog Monitoring Accuracy | ± 0.2% | ± 0.2% |
Digital Monitoring Accuracy | ± 0.2% | ± 0.2% |
Remote Analog Monitoring Levels | 0 - 10.0 V | 0 - 10.0 V |
Control Limits | |
Remote Sense Limits | 3% maximum voltage drop from output terminals to load. Remote sense is not available for models with output voltages greater than 1000 Vdc or with +ISO option. |
Period Programming Limits | Minimum period: 10 msec |
Digital control inputs and outputs limits | Input voltage: 0 to 5 Vdc, 10K input impedance; |