 | |   | 
217.00x85.00x84.00 (mm)
8.54x3.35x3.31 (inch) | |
| 
VOLTAGE：90 ~ 264VDC
FREQUENCY: 47~63HZ
STEADY-STATE CURRENT: 8/4A MAX AT ANY LOW/HIGH VOLTAGE
INRUSH CURRENT: 40/60A @ 115/230VAC | |
|
|
|
 | | Output Voltage | Output Current Min. | Output Current Max. | Output Current Peak | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] | | +5V | 0.5 | 32.00 | | ±5% | ±1% | 50mV |
|
| |
| | * +5V AND +3.3V TOTAL OUTPUT MAX: 170W | 
* TEMPERATURE RANGE：OPERATING 0℃～40℃, STOREAGE -20℃~80℃
* HOLD UP TIME：16mS IN REGULATOIN LIMIT AT 90VAC INPUT VOLTAGE
* EFFICIENCY(PER SET)：POWER SUPPLY EFFICIENCY TYPICAL >80% AT 230V, FULL LOAD
* OUTPUT PROTECTION: OPP / OVP / SCP / OCP
* REMOTE ON / OFF CONTROL
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: BUZZER, TTL SIGNAL
* EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022)
* EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE
* SAFETY APPROVAL: UL, CUL, TUV, CCC
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
|
|
|
|
