 | |   | 
300.00x101.20x84.00 (mm)
11.81x3.98x3.31 (inch) | |
| 
VOLTAGE： 100～240VAC FULL RANGE (WITH ± 10% TOLERANCE)
FREQUENCY： 47～63HZ
INPUT CURRENT (PER POWER MODULE)：15/7A FOR 115/230VAC
INRUSH CURRENT (PER POWER MODULE)：60/80A MAX. FOR 115/230VAC (25℃) | |
|
|
|
 | | Output Voltage | Output Current Min. | Output Current Max. | Output Current Peak | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] | | +5V | 0.5 | 32.00 | | ±5% | ±1% | 50mV |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| * +5V AND +3.3V TOTAL OUTPUT MAX: 190W
* TOTAL OUTPUT MAX: 1010W | 
* TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE -20℃~80℃
* HOLD UP TIME：16mS MIN.
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY：>80% AT 115V, 20%~100% MAX LOAD.
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500Ms
* OVER POWER PROTECITON: 110~160%
* OVER VOLTAGE PROTECTION：+3.3V→3.7V～4.1V，+5V→5.7V～6.2V ，+12V→13.3 V～14.3V
* OVER CURRENT PROTECTION: +5V→35~48A, +12V→91~125A, +3.3V→35~48A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* EMI NOISE FILTER: FCC CLASS B , CISPR 22 CLASS B
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* SAFETY：TO MEET UL, TUV, CB IEC 60950
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
|
|
|
|
