Preface
插入装有电池的应急电池合，显示屏自动进行扫描，看显示屏是否多或少笔画，扫描结束后，显示ALL READY，然后进入低功耗睡眠，此后长显00-01-01（年、月、日）及00：00（时、分）。
Insert the battery box together with an emergency battery, the display automatically scans to see whether it displays more or less strokes, after scan it will show “ALL READY”, then enter low-power sleeping state, after this show 00-01-01 (years, month, day) and 00:00 (hours, minutes) for loge time.
一、此密码锁有管理码和用户码两套密码（都为1-8位），出厂密码分别为88888888和666666。
1 there are two factory code ,they are manage code(88888888) and user code(666666). Both of them is 1-8 digits .
二 、开门：按"#"键，显示屏为蓝色显示--------，输入开锁密码，按“#”键，显示屏为黄色显示“open”。
Unlock : press “#”button ,the screan display bule“------”
Input the right code,then press “#”button ,the screan display yellow and display “open”.
三、管理码和用户码的修改：
1、管理码修改:按"#"键，显示屏为蓝色显示--------,输入管理码88888888,显示屏为黄色显示“open”，按“*”键进入修改密码状态，输入新密码后按"#"确认.听到"滴",说明管理码修改成功。
Changing Manage code :press the “#”button the screan display bule“------” input the old manage code (88888888), then press “#”button ,the screan display yellow and display “open”,then press “*”button ,input the new code then press the “#”button to confirm,when you hear the sound from tne buzzer “di”,code is changed successfully.
2、 用户码修改: 按"#"键，显示屏为蓝色显示--------,输入 用户码666666再按“#”,显示屏为黄色显示“open”，按“*”键进入修改密码状态，输入新密码后按"#"确认.听到"滴",说明管理码修改成功。
Changing the user code :press “#”button ,the screan is bule -----,input user code 666666,then press “#”button,the screan is yellow and display “open”,press “*”button into changing state,input the new code then press”#”to confirm,when you hear “di”,you chang the code successfully.
注：修改时看好显示记住密码。
Notice :please remember the code you has changed.
四、欠压指示：
Low voltage warning
当电池电压不足时，显示屏右下脚的电池符号显示为“ ”，表示电池的电压已经不足，请尽快更换电池。
When the battery voltage is low, lower-right corner displays a battery symbol is displayed as "----", indicating the battery voltage has been inadequate, please replace the battery as soon as possible.
五、时钟设置：在静态时，按“*”键，显示屏“--------”的第一位闪动，此时要键盘进行时间设置，按#键移动闪动位，设置结束自动确认。
In sleeping state , press the "*" button, the screan display "--------" first, at this time press the “0” or “8” button to set, press the “#” button to move the flashing bits, press the “#” button for confirmation after setting end.
六、显示消隐：在输入密码前，先按#键，然后按*键，再输入密码，密码将以“口”显示。
Press the “#” button before enter the password, then press the “*” button, then enter the password, the password will be displayed by "mouth".
七、错码删除：在输入密码的过程中，可按“*”键删除字符。
While you are entering the code, you can press the "*" button to delete .
'
