供应进口塑料防爆电磁阀，聚四氟乙烯电磁阀
德国泰科阀门（国际）有限公司—广州总代理
德国泰科聚四氟乙烯防爆电磁阀简介：
进口塑料电磁阀分为：防爆和非防爆，
连接尺寸有：法兰、粘接、螺纹等。
流体温度：≤50℃、≤180℃，
通径：DN1.2- DN80．
螺纹防腐电磁阀是用工程塑料PVC、 CPVC、UPVC、ABS或聚四氟制造。密封件，适宜饮用水、各类未经处理的污水、雨水、海水及各种酸碱盐溶液、有机溶剂等。流体与金属隔绝防腐；无易损膜片；零泄漏；大流量；超大先导孔防颗粒杂质堵塞。
UPVC电磁阀：
UPVC电磁阀（又称硬PVC），它是氯乙烯单体经聚合反应而制成的无定形热塑性树脂加一定的添加剂组成。有较强的力学性能，耐磨，难燃，介电性能良好，具有耐腐蚀性能，可适应一般性的腐蚀性流体。流体与金属部件（动铁芯、弹簧）完全隔绝，实现了结构上真正的耐腐蚀。活塞取代膜片，电磁阀寿命长。先导孔孔径超大，路径短且直，不易被颗粒物、沉淀物或流体中的结晶物堵塞。嵌入式密封结构，密封性能更加可靠。被广泛用于洗涤剂、印染、造纸废液等等。
CPVC电磁阀：
CPVC电磁阀树脂由聚氯乙烯（PVC）树脂氯化改性制得，是一种新型工程塑料。该产品为白色或淡黄色无味、无臭、无毒的疏松颗粒和粉末。PVC树脂经过氯化后，分子键的不规则性增加，使树脂的溶解性增大，化学稳定性增加，从而提高了材料的耐热性、耐酸、碱、盐、氧化剂等的腐蚀。提高了树值的热变形温度的机械性能，氯含量由56.7%提高到63-69%，维卡软化温度由72-82℃，（提高到90-125℃），最高温度可达110℃，长期温度为95℃.适用于酸洗、酸碱、洗涤剂、印染、造纸废液、次氯酸钠溶液。
German TEKValves (International) Co., Ltd. - Guangzhou distributor
Introduction:
Imports of plastic solenoid valve is pided into: Ex and non-Ex, connecting flange sizes, bonding, thread and so on. Fluid temperature: ≤ 50 ℃, ≤ 180 ℃, diameter: DN1.2-DN80. Solenoid valve is threaded corrosion engineering plastics PVC, CPVC, UPVC, ABS or PTFE manufacturing. Seals, suitable for drinking water, all kinds of raw sewage, rainwater, seawater and various acid salt solutions, organic solvents. Isolated from the fluid and metal corrosion; no wearing diaphragm; zero leakage; large flow; oversized pilot hole anti-particles clogging impurities.
UPVC solenoid valve:
UPVC solenoid valve (also known as hard PVC), vinyl chloride monomer which is formed by the polymerization reaction of amorphous thermoplastic resin and certain additives. There is a strong mechanical properties, wear resistance, flame retardant, good dielectric properties, corrosion resistant, can be adapted to general corrosive fluids. Fluid and the metal part (movable iron core, a spring) completely isolated, the structure to achieve a true corrosion. Substituted piston diaphragm solenoid long life. Large diameter pilot hole, the path is short and straight, can not easily be particulate matter, precipitates or crystals in the fluid blockage. Embedded seal structure, more reliable sealing performance. Is widely used in detergent, printing and dyeing, paper waste and so on.
CPVC Solenoid valve:
Solenoid Valve CPVC resin made from polyvinyl chloride (PVC) resin modified chloride obtained, is a new engineering plastics. The product is a white or yellowish, tasteless, odorless, non-toxic, loose particles and powders. After chlorinated PVC resin, the molecular bonds of the irregular increases, the solubility of the resin increases, chemical stability, thereby improving the heat resistance of the material, acid, alkali, salt, oxidants such as corrosion. Increase the value of the tree heat distortion temperature mechanical properties of the chlorine content from 56.7% to 63-69%, Vicat softening temperature from 72-82 ℃, (up to 90-125 ℃), the maximum temperature up to 110 ℃, long-term temperature is 95 ℃. apply to pickling, acid and alkali, detergents, printing and dyeing, paper waste, sodium hypochlorite solution.
供应进口塑料防爆电磁阀，聚四氟乙烯电磁阀
