供应进口塑料电磁阀（德国塑料王电磁阀）
德国泰科阀门（国际）有限公司—广州总代理
概述：
一、进口聚氯乙烯（UPVC）电磁阀特性：
二、材质特点
a. 电磁阀阀体、阀盖、阀芯材质：UPVC；
b. 阀杆：聚四氟乙烯（PTFE）；
c. 密封件：三元乙丙（EPDM）、氟胶（FKM）；可适应一般性的腐蚀性流体介质，性价比高；
2. 独特的结构工艺
a.腐蚀性流体与金属部件（动铁芯、弹簧）完全隔绝，即流体只与PVC、聚四氟、密封件接触，实现了结构上真正的耐腐蚀；
b. 先导孔孔径超大，路径短且直，不易被颗粒物、沉淀物或流体中的结晶物堵塞（例如：水中的泥沙、卤水中的结晶盐等）
c. 嵌入式密封结构，密封性能更加可靠；
3. UPVC电磁阀的优越性
a.电磁阀零泄漏
b. 电磁阀流量孔径为标准值，满足相对应的流量要求。
c. 电磁阀对流体中的颗粒物、沉淀物适应性强，应用在污水处理、农林灌溉、海水淡化、海水养殖。工业过程中的酸性、碱性流体尤其在如磷酸等易结晶流体方面具有明显的优势。
由于产品科学的设计使产品结构更简单，维护也十分简单，具有更高的可靠性，更长的使用寿命。
*注：我公司可按客户要求，设计、生产特殊功能、规格的产品
四、安装与使用
a. 电磁阀应安装在无滴水的环境，以免线圈长期受潮
b. 电磁阀应安装在振动较小的地方，
c. 安装前应将管路清理干净；
d. 安装时阀体箭头必须与介质流向一致；
e. 安装使用前应检查电源是否与标识相符；
f. 法兰式电磁阀与管道法兰对接时，应保证电磁阀的法兰不受到拉伸或挤压
Germany TEKValves (International) Co., Ltd. - Guangzhou distributor
Overview:
Imported PVC (UPVC) solenoid valve features:
Material Features
a. solenoid valve body, valve cover, valve Material: UPVC;
b. Stem: polytetrafluoroethylene (PTFE);
c. Seals: EPDM (EPDM), fluorine rubber (FKM); can be adapted to the generality of corrosive fluids, cost-effective;
2 unique structure process
Corrosive fluid and the metal part (movable iron core, a spring) completely isolated, that is, fluid only with the PVC, PTFE, seals contact the structure to achieve a true corrosion resistance;
c. oversized pilot hole diameter, the path is short and straight, can not easily be particulate matter, precipitates or crystals in the fluid blockage (example: water, sediment, crystalline salt brine)
d. embedded seal structure, more reliable sealing performance;
UPVC advantages of the solenoid valve
Solenoid valve zero leakage
b. solenoid valve flow pore size of the standard value, the corresponding flow rate to meet the requirements.
c. solenoid valve for fluid particles, sediment adaptable, used in sewage treatment, agriculture irrigation, desalination, marine aquaculture. Industrial processes acidic, alkaline fluids, such as phosphoric acid, etc. especially easy to crystallize fluid has obvious advantages.
Due to the scientific design makes the product more simple structure, maintenance is very simple, with higher reliability, longer life.
* Note: Our company according to customer requirements, design and production of special features and specifications of products
Installation and Use
Solenoid valve should be installed in an environment free from water, avoid long-term wet coil
Solenoid valve should be installed in place of the vibration is small,
Piping should be cleaned before installation;
Installation medium flow arrow on valve body must be consistent;
Installation should be checked before power is consistent with the logo;
f. flange type solenoid valve with pipe flange butt, should ensure that the solenoid valve is not subjected to tensile or compression flange
供应进口塑料电磁阀（德国塑料王电磁阀）
