供应进口气动三通调节阀（分流、合流）
德国泰科阀门（国际）有限公司—广州总代理
概述：
进口气动三通调节阀分为气动三通合流调节阀、气动三通分流调节阀，由气动薄膜多弹簧执行机构和三通阀组成。采用新型VTDRY多弹簧执行机构，具有高度低、重量轻、安装维修简便等优点。
三通阀阀芯结构采用圆筒薄壁窗口，并采用阀芯侧面导向。应用于比例调节或旁路调节，尤其适用于石油工业热交换器的流体温度控制系统的调节，一台三通阀可代替两台单座阀或双座阀使用，占据空间体积小，节省安装管道及费用。主要用热交换系统的温度和流量的调节。
阀体型 式：直通铸造球型阀公称通径：合流阀：25～300mm、分流阀：80～300mm 公称压力：PN1.6、4.0、6.4MPa
材 料：铸钢（ZG230-450）
铸不锈钢（ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti）等上
阀 盖：标准型-17～+230℃、散热型+230～+450℃、
波纹管密封：-40～+350
压盖型式：螺栓压紧式
填 料：V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石墨填料
结构形式：标准型、散热型和波纹管密封型
进口气动三通调节阀所采用的阀内组件 阀芯型式：薄壁圆筒型阀芯流量特性：抛物线特性和线性特性材 料：不锈钢（1Cr18Ni19Ti、1Cr18Ni12Mo2Ti、17-4PH、9Cr18、316L）、不锈钢堆焊司太莱合金、钛和耐腐蚀合金等
执行机构型式：德国泰科弹簧薄膜式执行机构
弹簧范围：20～100（标准）、40-200、80-240、20-60、60-100KPa
膜片材料：丁腈橡胶夹尼龙布、乙丙橡胶夹尼龙布
供气压力：140～400KPa
气源接口：RC1/4"
环境温度：-30～+70℃ ■
阀作用型式 气关式(B)--失气时阀位开(FO)；气开式(K)--失气时阀位关(FC)
German TEKValves (International) Co., Ltd. - Guangzhou distributor
Overview: Imported pneumatic three-way mixing valve into pneumatic control valve, pneumatic three-way perting valve, the pneumatic membrane multi-spring actuator and three-way valve. Using new VTDRY multi-spring actuator, with a low height, light weight, easy installation and maintenance, etc.. Three-way valve spool structure using a cylindrical thin window, and use the spool side guide. Applied to adjust the proportional control or bypass, especially for the oil industry heat exchanger fluid temperature control system regulation, a three-way valve can replace two single-seat valve or valve seat use, occupy small space-saving installation pipes and fees. Main heat exchange system temperature and flow regulation.
Body Type: Straight casting ball valve DN: mixing valve: 25 ~ 300mm, shunt valve: 80 ~ 300mm Nominal pressure: PN1.6, 4.0,6.4 MPa
Material: cast steel (ZG230-450)
Cast Stainless Steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti) wait
Bonnet: Standard -17 ~ +230 ℃, cooling type +230 ~ +450 ℃, bellows seal -40 ~ +350 ℃ Gland Type: Bolt Clamp Packing: V-type PTFE packing, impregnated poly asbestos PTFE packing, graphite packing structure: standard, heat-and bellows seal type
Imported pneumatic three-way valves used Spool valve components: thin-walled cylindrical spool Flow characteristics: linear characteristic parabolic characteristics and material: stainless steel (1Cr18Ni19Ti, 1Cr18Ni12Mo2Ti ,17-4PH, 9Cr18, 316L), stainless steel welding Division Stellite alloys, titanium and other corrosion-resistant alloys
Actuator Type: German TEKspring diaphragm actuator spring range: 20 to 100 (standard) ,40-200 ,80-240 ,20-60 ,60-100KPa diaphragm material: nitrile rubber clamp nylon, ethylene-propylene rubber grip nylon supply pressure: 140 ~ 400KPa air Connection: RC1 / 4 "ambient temperature: -30 ~ +70 ℃ ■ The role of type air-to-close valve (B) - loss of gas when the valve opening (FO); open air (K) - loss of gas when the valve closed (FC)
供应进口气动三通调节阀（分流、合流）
