【供应单组份自干金属油墨】价格_厂家

供应单组份自干金属油墨

不限

￥

中国上海

产品属性

图文详情

品牌推荐

保质期

使用材料

金属，玻璃，陶瓷，电镀

表干时间

性能

耐水煮，耐酒精，

型号

MPL

品牌

欧莱斯

连接料

树脂油型

印刷方式

网印油墨

干燥形式

自然干燥

承印物

塑料用油墨

产地

德国

颜色

各种，调色

外观

圆形

叠印性

100

颗粒细度

0.01μm

含水量

100%

附着强度

100

粘度

100S

流动性

100mm

稳定性

100

渗透性

100μm

干燥时间

24min

包装规格

1KGml

储存温度

20℃

油墨特性：拥有和德国彩丽宝一样的颜色,主要用于PP,PE,BOPP等材料上,具有高色泽,高色彩,高遮盖力,高稳定性,耐酒精及耐磨擦之特点。印刷：丝印移印均可。表干及实干时间：表干时间自然挥发5-10分钟；实干时间在24小时以内。稀释及清洗：SV3慢干开油水,UVK1（移印开油水）同时可使用718洗网水清洗。测试方法（完全干燥后）： 1,3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2,纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3, 耐磨：橡皮擦500g力水平来回擦500次。使用方法： 1,使用前应充分搅拌,用后随时封闭； 2,搅拌时加开油水10-15%,稀释到印刷粘度； 3,网板塞网时可用洗网水清洗； 4,不得与其它类型油墨混合使用。注意事项： 1,塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷； 2,在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3,环境温度过高,将会影响油墨原有质量； 4,根据气候变化,请远离火源,阴暗环境下存放。 The characteristics of ink:Have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, high alcohol and wear resistance, high stability.Printing: silk screen printing can be.Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water ) can be simultaneously used 718 washing network water cleaning.Test method ( completely dry):1, 3M gummed paper with ink surface adhesion in the painting, the 45 degree angle quickly pulled off the oil;2, purity 99% of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, the horizontal force and pull 200 times without decolorization;3, wear resistance: the eraser 500g force level wipe 500 times back and forth.Method of use:1, before the use should be fully mixing, use at any time after the closure;2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;3, mesh plug mesh can be used when washing network water cleaning;4, shall not be mixed with other types of ink.Matters needing attention:1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing;2, in the printing process, such as drawing or spread out, may be appropriate to add some cream to slow drying;3, the ambient temperature is too high, it will affect the quality of the original ink;4, according to the climate change, please stay away from fire, stored in a dark environment.

原料辅料、初加工材料 > 精细化学品 > 油墨 > 印刷油墨 >