Features:

²      1000mm*10mm SMD Light Ribbon(30PCS LED)

²      Working Voltage：DC12 V

²      Working Current：570-600mA

²      LED View Angle：120 DEG

²      Non-Waterproof

²      Package:5meters /Rell

Applications:

²      Path&contour marking.

²      Legend backlighting.

²      Illuminated signs.

²      Mood and special light.

Dimensions and Schematic Diagram

Absoute Maximum Rating at TA=25°C

Electrical／Ｏptical Characteristics at TA=25°C

Notes:Tolerance of measurement of luminous intensity±15%.

Instruction

1.Connection

R/Y/B/G/W Single color waterproof LED strip Series : There are two wires for the product(Wire Pathway 22AWG; Wire Length 150MM),the Red one is connected to the positive section of the power supply while the Black one is for the cathode.If use the controller,the Red one is connected to the positive section of the controller while the Black one is for the cathode.See the diagram for better understanding.：

2.Installation

3M double glue on the back of the product. Rive off the protection paper then install the product to anywhere you need to.

3.Installation Notice：

1）、Make sure the connection is correct according to the diagram.

2）、Pay attention on the parameters limit on the above form.DO NOT run over the peak value.

3）、Keep the surface of installation clear and level avoid breaking off.

4）、Avoid the crook area is the just the position of LED and other components,in order to protect the product and extend the life span of the product.

5)、Pls keep the product under the antistatic shielding when installation,DO NOT use the sharp tool to touch the product.