一、产品介绍
本产品可使用普通的彩色喷墨打印机，并适用于普通水性墨水。打印后的图案热压后可以转印在深色的、含有棉质纤维材质的织物面料上，制成各种个性化的产品，如：文化衫、运动服、抱枕、手帕、口罩、帽子、环保袋等。转印后的图像清晰、逼真、色彩鲜艳、耐水洗！
规格：A4 尺寸：210MM×297MM
包装：50张/包 1800张/箱
二、使用说明 （深色棉用喷墨热转印纸）
1. 打印
- “打印设置”中选择“照片纸”打印，以便获得满意的打印效果。
- 待打印图案完全干燥10分钟后进行转印。
- 剪去图像其他空白部分，留有5毫米的边界即可。
2. 转印
- 先将烫画机预热到转印温度165℃。
- 从底纸上剥离如薄膜形式的图像层材料。
- 放置图像在织物上，图像面向上（即图像面露出，而不是面朝下对着织物）。
- 放一张隔离纸在图像上。
- 压下烫画机，受压时间为15-30秒，取出织物，待冷却后剥离隔离纸。
3. 洗涤
- 转移后24小时内，不可以洗涤。
- 洗涤应使用冷水或30-40℃的温水。不要使用漂白剂或碱性太强的洗衣粉洗涤，避免用力搓洗转印图案。
- 不要拧干，最好于阴凉处晾干。
- 不可干洗。
Operation Instructions
(Dark Inkjet Transfer Paper)
Dark-colored inkjet transfer paper is suitable for transferring images onto dark-colored cotton or cotton-mixed fabrics. It is printed with common color inkjet printers using water-based ink.
1. Printing
- Printer setup. Recommend to select “Photo Quality Inkjet Paper” mode for satisfactory printing results.
- Print the wishful image onto the transfer paper. Then leave it to dry for about 10 minutes.
- Cut out the image, leaving a narrow margin of 5 mm around the pattern edges.
2. Transferring
- Preheat the heat press machine and set the recommended transfer temperature to 165℃.
- Peel off the base paper from the printed coating, and the coating would remain as a film-like material.
- Place the image coating on the textile, printed (image) side facing up.
- Put the isolation paper on the image, the glossy side facing down.
- Transfer for 15-30 seconds, then remove the textile from machine, peel the isolation paper after cooled.
3. Washing
- It’s best not to wash the textile in 24 hours after transferring.
- Washing the textile in cold or 30-40℃ water. Do not wash with strongly alkaline detergents, and no bleach. Avoid rubbing the transferred pattern when hand washing.
- Do not wring. Line dry in shade recommended.
- Don’t dry-clean.
'
