【产品名称 NAME】 TES-1050S 系列 TES-1050S Series
【产品说明 description】
螺丝可调（1.0 1.2 1,4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0 ）可使用特殊螺 丝，1 :1 短螺丝，带垫片螺丝都可以通用。
The machine is applicable to screws of various specififications （ 1.0 mm - 5.0mm ） , especially for 1:1 short screws and screw with gaskets .
【产品特性 Product Features】
1、一机可适用多种规格螺丝 1.0.5.0 可调（1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0 ）;
Applicable to screws of various specififications （ 1.0mm - 5.0mm） ;
2、可使用特殊螺丝，特别适用于 1 : 1 短螺丝带垫片螺丝；
especially applicable to 1:1 short screws and screw with gaskets;
3、轨道可抽出自由调整，简单易懂 , 操作方便，无卡螺丝现象；
The design of separate rails makes it possible to draw out the rails to make adjustment freely, making it easy to operate.
4、螺丝在滚筒内进行运动落斗，凡是未进入轨道的螺丝会进入下个循 环。 可调整工作速度大小，通过调整震动强度来改变速度，螺丝 到达取点位置 不会前后抖动而影响工作效率；
Screws move with the roller and fall at the high position, the screws, which did not enter the track, will move into the next cycle. The wor king speed can be adjusted by adjust the vibration strength, without shaking the screw at the taking point;
5、送料与振动驱动独立控制，可设定延时停止时间，当非正常情况产 生时 , 螺丝机会启动故障报警功能，操作起来和其它螺丝机一样简 单；
The drives of feeding and shaking are controlled independently. Idea l time lag shout down time can be set freely.
6、当取出螺钉时，对螺钉头部位置，只要把批头放入批头导向处，顺 着 导向下滑，然后朝面前把螺钉拉出即可；
The machine can start the failure alarming function in case of abnor mal conditions;
7、计数功能，自动报警，循环，带数字显示面板，一面目了然。
Statistical function,When setting achieved,the machine will automati c alarm and cycle,it is very clear to see with digital display panel
