进口胶管阀 Import hose valve
胶管指以橡胶管套为密封件和启闭件，通过手轮的传动带动上下闸板运动，从而对压缩管套进行关闭和开启的阀门。
Hose refers to the rubber sleeve for the seal and the opening and closing parts, through the hand wheel drives the upper and lower gate movement, so as to open and close the valve to a compression sleeve.
进口胶管阀特点 Import hose valve characteristics ：
1.胶管阀多功能阀，它能代替闸阀，截止阀，调节阀使用。
Multifunctional valve 1 hose valve, which can replace the gate valve, globe valve, adjusting valve.
2.橡胶远比钢、铁及其它各种金属材料耐磨，当介质带有固体颗粒介质时，管夹阀能胜其任。
rubber than wear-resistant steel, iron and other metal materials, when the medium with solid medium, pipe clamp valve can win any of its.
3.橡胶对配方的调整可以耐各种化学溶剂的腐蚀，
Adjust the 3 rubber on the formulation of the corrosion resistance of various chemical solvent,
4.胶管两端带有橡胶法兰。当阀门与管道连接时，不需另加密封垫圈，阀位上无跑、冒、滴、漏等不良现象发生。
The 4 hose ends with the rubber flange. When the valve and pipeline connection, without the other sealing gaskets, valve position without adverse phenomena run, run, drip, leak.
5.结构简单，便于检修和更换胶管。
simple structure, easy maintenance and replacement of rubber hose.
6.耐寒性能好。由于流体介质在富有弹性的胶管中流动，从而排除了流体晶化所造成的壳体冻裂等恶果。
cold resistance is good. The fluid flow in the hose flexible, thereby excluding the fluid crystallization caused by evil shell cracking.
进口胶管阀由阀体、阀杆、胶管、挤压结构、手轮等部件组成，胶管由天然橡胶精工配料模压而成。
Import hose valve consists of valve body, valve, hose, the structure of extrusion, hand wheel and other parts, from natural rubber hose Seiko ingredients and molding.
此阀结构简单，是国内唯一无泄漏阀门，能耐各种中等浓度的酸任意浓度碱盐溶液，能输送矿浆和干湿的粉料及有结冒物体介质。
This valve has simple structure, is the only domestic valve without leakage, acid free alkali concentration salt solution can resist various medium concentration, powder conveying dry and pulp and node object medium at.
使用温度≤160℃ The use of temperature≤ 160 ℃
设计压力≤2.5MP Design pressure is 2.5MP
产地：德国 Origin: Germany
产品品牌：德国Orsen奥尔申 The product brand: German Orsen
德国Orsen奥尔申胶管阀优点 Germany Orsen Creole Shen hose valve advantages:
进口胶管阀可以在管道上任意安装，没有介质流向限制。2、采用进口优质橡胶，耐磨耐腐蚀，使用寿命长。3、阀体材质有铝合金和铸铁，铸钢，不锈钢，可长期使用；在长久使用下一般只需更换管套Import hose valve can be installed in the pipeline, not the flow of media restrictions. 2, the use of imported high-quality rubber, corrosion resistant, long service life. 3, the body is made of aluminum alloy and cast iron, cast steel, stainless steel, can be used for a long time; in the long-term use is only replaced.
