进口气动法兰式球阀一种转角为90°的旋转类控制阀。它由气动活塞式执行机构和O型球阀组成，阀芯采用圆柱形通孔球体。QJ(D/S)R型为软密封球阀、QJ(D/S)RY型为硬密封球阀。
该产品以压缩空气为动力源，接受集散控制系统(DCS)，可编程控制器(PLC)等开关信号，通过电磁阀可实现对阀门快速位式控制。
该产品采用直通型铸造阀体，球面经特殊工艺加工和硬化处理，使其表面光滑耐磨，具有寿命长、结构紧凑、动作可靠、流通能力大、流阻系数小、安装方便及良好的切断性能等特点。产品广泛应用于造纸、石化、冶金、航天、食品、医药、水处理等行业，特别适用于高黏度和含有纤维介质的工艺控制。
气动活塞式执行机构可分为单作用和双作用两种。双作用使用在失电或失气时，阀门处于失电或失气时的位置，以确保继续生产。单作用在失电或失气时，阀门处于原始极限位置(全开或全闭)，以确保生产过程处于安全位置。

QJ (D / S) R-type O-intensive small pneumatic valve one kind of cut off the corner of 90 ° rotation of the controlled valve. It consists of pneumatic piston actuator and the composition of O-type ball valve, valve core sphere using cylindrical hole. QJ (D / S) R-type for soft seated ball valve, QJ (D / S) RY-type of seal valve.
The product is compressed air as power source, accept the distributed control system (DCS), programmable logic controller (PLC) such as switching signals, can be realized through the solenoid valve control valve fast bits.
The product is through casting body, spherical processed by special technology and hardened, making it a smooth surface wear, with a long life, compact structure, reliability, flow capacity, flow resistance coefficient is small, easy to install and good cut-off performance characteristics. Products are widely used in papermaking, petrochemical, metallurgy, aerospace, food, medicine, water treatment and other industries, particularly for high viscosity and contain fiber media process control.
Pneumatic piston actuators can be pided into single and double acting two. Dual role in the loss of power or loss of use of gas when the valve is out of power or loss of gas when the position to ensure continued production. Single in the loss of power or loss of gas when the valve is in the original extreme position (open or closed) to ensure that the production process in a secure location

 

 

2、执行机构扭转及动作时间Action to reverse the actuator and the time

执行机构型号AGT		63*90	75*90	83*90	92*90	110*90	118*90	127*90	160*90	210*90	254*90	255*90
扭矩N.m	400KPa	23.2	40.0.	56.0	77.6	112.8	168.0	220.0	440.0	948.0	1740.0	2172.0
	500KPa	29.0	50.0	70.0	97.0	141.0	210.0	275.0	550.0	1185.0	2175.0	2715.0
动作时间(S)		0.241	0.333	0.429	0.444	0.461	0.60	0.857	1.62	3.33	6.00	7.50

注：1、双作用执行机构在75%负载情况下的动作时间   2、缩短动作时间可允许非标配置

Note: 1, double-acting actuators at 75% load case, the action time of 2 to shorten the operating time to allow non-standard configuration

三、允许压差Permissible differential pressure
1、双作用执行机构  PN1.6阀体 Double-acting valve actuator PN1.6

 单位：MPa

公称通径(mm)		15	20	25	32	40	50	65	80	100	125	150	200	250	300
执行机构 Executive body	气源KPaG	允许压差Permissible differential pressure
AGT63	400	1.6	1.6	1.09
	500	1.6	1.6	1.6
AGT75	400			1.6
	500			1.6
AGT83	400				1.6	1.6	0.97
	500				1.6	1.6	1.95
AGT110	400				1.6	1.6	1.6
	500				1.6	1.6	1.6
AGT118	400						1.6	1.9	0.63
	500						1.6	1.6	1.24
AGT160	400							1.6	1.6	0.29
	500							1.6	1.6	0.65
AGT210	400									1.6	1.25	0.65
	500									1.6	1.58	0.93
AGT254	400										1.6	1.51	0.62	0.51
	500										1.6	1.9	0.78	0.68
AGT255	400											1.6	1.26	1.43	0.8
	500											1.6	1.26	1.84	1.05

2、单作用执行机构   PN1.6阀体Single-acting valve actuator PN1.6

公称通径(mm)		15	20	25	32	40	50	65	80	100	125	150	200	250	300
执行机构 Executive body	气源KPaG	允许压差Permissible differential pressure
AGT75	400	1.6	1.6
	500	1.6	1.6
AGT83	400	1.6	1.6	0.75
	500	1.6	1.6	1.6
AGT110	400			1.6
	500			1.6
AGT118	400				1.6	1.04
	500				1.6	1.6
AGT160	400				1.6	1.6	1.6	0.16
	500				1.6	1.6	1.6	1.08
AGT210	400						1.6	1.6	1.02
	500						1.6	1.6	1.6
AGT254	400							1.6	1.6	1.32	0.26
	500							1.6	1.6	1.6	1.1
AGT255	400									1.6	1.7	1.01	0.22	0.28	0.1
	500									1.6	1.6	1.71	0.71	0.6	0.3

四、可配附件Available Accessories
电磁阀、手轮机构、阀位开关、空气过滤减压器等。

Solenoid valve, hand wheel, valve position switch, air filter regulator and so on

订货须知Ordering Information

1、产品型号 2、公称通径 3、公称压力 4、阀体和阀内组件材料(介质性能)
5、介质温度 6、双作用或单作用(单作用请注明气开式或气关式)

1, Model 2, DN 3, PN 4, the valve body and internal components of materials (dielectric properties)
5, 6 medium temperature, double or single acting (one role please specify air or gas shut-open type