我公司专业生产花岗岩、大理石抛光磨头、花岗岩大砂锯、大理石锯等优质产品,并不断的研发其他新型抛光磨头，希望能与贵公司达成长期合作.常年供应,保证质量,价格从优!

凸轮式全封闭六爪磨头 

<1>本产品适用于各种花岗岩，瓷砖和微晶石的抛光。

<2>磨头内部结构科学合理，凸轮式正曲线摆动，磨削速度快，磨头磨抛平稳有力，上光快，降低磨料的消耗;

<3>内部轴承采用西德和日本进口轴承；

<4>可与连续磨、双头磨、单头磨及各种进口磨机搞配套，安装、维修方便，维护保养费用非常低，使用寿命超长。

技术参数
1.外径尺寸        530mm
   最大高度        275mm
   净重            110kg
 2.主轴法兰盘的安装尺寸：

主轴直径          ￠175 mm
    主轴止口直径  ￠85mm。
    主轴连接孔       3-M18或3-￠17，中心距￠138 mm
 3.可根据客户要求配做主轴法兰

CAM TPYE WHOLE-SEALING GRINDING-HEAD WITH 6-CLAW

<1> It is suitable for polishing all kinds of granite;ceramic tile and microlite.

<2> The inner structure of grinding head is scientific and logical.It is with cam type sinusoidal curve of vibration to suitable for fast grinding.May steadily and powfully grind slab, moreover, fastly glaze slab and reduce abrasive consumption.

<3> Mainly bearings are imported from West-Germany and Japan.

<4>It is suitable for continuous grinder;double-head grinder;single-head grinder and all kinds of imported grinder. It is easy to be installed and repaired,moreover, it is with lower maintance cost and over-length life

TECHNICAL PARAMETERS

1.  Outer diameter size                                      530mm 

The heightest height                                     275mm

Net weight                                        110kg

1. The size for flange-disc of main shaft

Diameter of main shaft                  Ф175mm

Diameter for upper of main shaft          Ф85mm

Connecting hole for main shaft         3-M18 or 3-Ф17mm

Centeral distance                   Ф138mm

3.  Produce new flange of main shaft as per customer’s requirement.

公司网址：www.shicaijixie.cn