深圳奥纳科技有限公司 代理销售日本村田MURATA品牌射频测试头,也称射频探针.常用型号国内都备有现货.量大价优.
常用型号如下:
村田高频头121500
村田高频探针MM121530
村田射频头MM121531
MURATA高频头MM121540
MURATA高频探针MM126036
MURATA射频头MM126038
村田高频针MM126056
村田高频测试头MM126310
村田高频头MM126314
村田高频探针MM126320
村田高频头MM206411
村田RF同轴连接器MM8030-2610
村田带开关同轴连接器MM8130-2600
村田RF带开关射频同轴连接器MM8430-2610
村田射频同轴连接器MM9329-2700
村田测试线MXHS83QE3000
村田高频线MXHS83QH1000
村田高频测试线MXHS83QH3000
村田高频线MXHS83QH5000
MURATA高频线MXHQ87WA3000
以上型号常备国内库存.1-3天交期.款到发货.
欢迎大家来电订购.量大价优.原装新货.1-2天货期
我们以”诚信,专业,双赢”的经营理念,期待与您的密切合作,共同发展!
深圳奥纳科技有限公司
朱先生 13632701009
电话:0755-85293010-8001
邮箱:zb@awnatech.com
QQ1:418687999 QQ2:1079347628 QQ3:2663463021
深圳市龙华新区民治大道牛栏前大厦C618室.
MXHS83QE3000是第1代测试线.主要针对村田MURATA的RF射频座MM8430-2610,MM8130-2600进行测试,
产品尺寸图片:
产品参数:
2. RATING:
Item Specification
Voltage Rating 250V r.m.s. maximum
Nominal Frequency Range DC to 6GHz
Nominal Impedance 50W
Temperature Rating -40°C to +90°C
Insulation Resistance 500 MW minimum
Withstanding Voltage No evidence of breakdown
Initial Contact Resistance
(without conductor resistance)
Center contact 25.0mWmax.
Outer contact 20.0mWmax.
Voltage Standing Wave Ratio (V.S.W.R.) Meet the requirements of following spec.
1.6max.(DC~3GHz)
2.0max.(3~6GHz)
Insertion Ioss 0.6dBmax. (DC~3GHz)
1.5dBmax.(3~6GHz)
Durability 1M cycles
产品使用注意事项:
3. USE THIS PRODUCTS
3.1 The directions for attachment to measurement machine.
The probe must be attached to machine at the two screw holes in probe flange.
3.2 The tolerance of position against MM8430-2600
With the standard attachment method, +/-0.05mm is permitted against the hole center of MM8430-2600.
However, with the machine which has the following function, +/-0.7mm is permitted against the hole center of
MM8430-2600B.
The function is to utilize the taper at tip of probe (See Figure 3). If the taper can be acting as the guide, tolerance
can be wider.
3.3 The engagement strokes (Figure 3)
To get the 15dB or higher isolation (up to 6GHz), The engagement strokes from the flange to the tip of probe is
18.28mm to 19.78mm for the outer conductor.
3.4 The slant angle tolerance of probe against MM8430-2600 (Figure 3)
To have the stable measurement, MXHS83QE3000 slant angle must be +/-2degree.
产品实物图片: