【产品名称 NAME】 EK 系列 EK Series

【产品说明 description】

 当你取出螺钉时 , 对螺钉头部位置不必特别注意 , 只要钻头放入钻头导承间 , 顺着导承向下滑 , 然后朝自己这边把螺钉拉出即可。

 When you take the screw, you needn’t paying special attention to the position of the screw head, just put the drill tip into the guide, then slide along, the screw will be pulled out.

【产品特性 Product Features】 

1、当你取出螺钉时 , 对螺钉头部位置不必特别注意 , 只要钻头放入钻头导承间 , 顺着导承向下滑 , 然后朝自己这边把螺钉拉出即可 ; 

 When you take the screw, you needn’t paying special attention to the position of the screw head, just put the drill tip into the guide, then slide along, the screw will be pulled out； 

2、比起传统螺钉托盘来 , 每个螺钉可以节省 1.4 秒的时间求生产率高达 4 倍 ; 

Compared with traditional screw feeder, this equipment can save 1.4 seconds each time, productivity increased by 4 times;

3、不必对正螺钉 , 只需将螺钉成批投入料仓内即可 ; 

 Don’t need aligning the screw, just put screws into the hopper;

4、广泛适用于各种类型 , 长度和头部形状的螺钉 ; 

 Widely used in many screw types with different length and head shape;

5、螺钉头的形状可用本机外部控制器简单地调整 ; 

 The equipment can be adjusted simply to be applied to the screw with the washer；

 6、形体小 , 不占地 , 一个操作人员可以同时操作数部机器 ; 

 Small size, one worker can operate several equipments at one position； 

7、带有过载保护电路和电机防反转电路 。

 This equipment has protection and reversal prevent circuit.