Spot Weld Chisel & Bar
L形合金钢焊缝撬棍(点焊处用)
The right angled Seam Chisel and L-bar has been specially designed
by Kennedy Tools for the separation of hard to reach spot welds and
bonded panels as well as coping with the many traditional uses for
pry and wrecking bars.
Features & Benefits
• Easily separates hard-to-reach spot welded or bonded panels
• Sharpened on three edges, the sharp end allows for penetration
between the panels and both side edges allow for side impact to
drive the panels apart without damage
• 90°end for use in hard-to-reach pinchweld areas
• Made from a super tough alloy steel
• Will save the technician up to 15 minutes per panel replacement
The Right Angled Rascal Bar with three sharpened edges is designed
to allow two-directional hammer use on quarter panels, rockers and
any other pinchweld. The sharp end allows for penetration between
the panels and the two lower edges allows for side impact to drive
the panels apart. The chisel tip can be used for starting seam
separation.