Product Type (产品类别)：电系列 Part No (型号): YLL-T53XW3AD-60I Product Identification Code/产品编码原则 Package Dimensions/外观尺寸 PART NO. | CHIP | Lens Color | Material | Source Color | YLL-T53XW3AD-60I | ALInGaP | White | 黄色透明 |
Notes: - All dimensions are in millimeters (inches).
- Tolerance is±0.25mm (.010”) unless otherwise noted.
- Protruded resin under flange is 1.0mm(.04”) max.
- Lead spacing is measured where the leads emerge from the package.
- Specifications are subject to change without notice.
Absolute Maximum Ratings at TA=25℃| Parameter(参数) | Symbol （符号） | Valce （标准值） | Unit （单位） | Power Dissipation（消耗功率） | Po | 600 | mw | Pulsed Forward Current（脉冲顺向电流） (1/10 Duty Cycle, 0.1ms Pulse width | IFP | 250 | mA | Continuous Forward Current（连续工作电流） | IF | 180 | mA | Reverse Voltage（反向电压） | VR | 5 | V | Operation Temperature Range（工作温度） | Topr | -25℃to +80℃ | Storage Temperature Range（储存温度） | Tstg | -35℃to +80℃ | Lead Soldering Temperature [4mm (.157”) From Body]（焊接温度） | Tsol | 260℃for 5 Seconds （260度下不超过5秒） |
Shape Specification/外观要求 NO（序号） | ITEM（项目） | SPEC OR DESCRIPTION | 1 | Lens胶体 | ◆ No chage color/不允许胶体变色 ◆ No disrepair/不可有破损 ◆ Scratch/划伤（length≤2nm；width≤0.25nm） ◆ Macula/黑点 ◆ Bubble/气泡 | 2 | PIN脚 | ◆ No oxidation/不可有氧化 | 3 | Configuration 结构 | ◆No Encapsulation reverse/不可封反 | 4 | Surface prepration 表面处理 | ◆Cut needn′t electroplate/切口出无需做电镀 | 5 | Lens Color 胶体颜色 | ◆Yellow/黄色 |
Electrical / Optical Characteristics at TA=25℃/光电参数规格Parameter（参数） | Luminous Intensity （Lm） | Source Color (K) | Forward Voltage （V） | Viewing Angle （deg） | Ra | Forward Current（mA） | | Min | Max | 60 | 65 | 2700-3200K 3500-4500K 5500-6500K | 3.0-3.6 | 120° | 70-75 | IF=180mA | 55 | 60 | 3.0-3.6 | 75-80 | 50 | 55 | 3.0-3.6 | 80-85 | | | | | | | | | |
Note：1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L’Eclairage) eye-response curve. 2.1/2 is the off-axis angle at which the luminous intensity is half the axial luminous and intensity. 3.The dominant wavelength,λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4.The IV guarantee should be added±15%. Opto-Electronical Grading Specification/光电分级规格 Forward Votage （正向电压） | 3.0-3.2V | 3.2-3.4V | 3.4-3.6V | Luminous Flux （lm）光通量 | 50-55lm | 55-60lm | 60-65lm |
Test conditions/测试条件：正向电流：180mA Chromaticity Coordinate Groups 1、Color Coordinates Measurement allowance is±0.01； 2、CCT is measured with an accuracy of±5%； 3、CCT scale is complied with ANSI color diagram 特性曲线图 详情请浏览我司网站：www.yuliangled.com | 
