产品描述：
◆管框架:钢管表面涂层处理，采用专利技术，具有很高的抗振动冲击性能，通过欧洲部门检测。
◆托 盘:钢托盘/钢塑复合托盘，托盘高度116mm，叉孔高度100mm。
◆内容器:采用抗紫外高密度聚乙烯吹塑一次成型，顶部进料口配有顶盖，包括压力透气装置和密封圈。
◆卸料阀:蝶伐/圆柱伐/球伐, DN50,接头可选粗牙（CCS60×6）/细牙(2”NPT)。
◆可选项:卸料阀门密封材质可供选择，标牌尺寸可根据客户要求定做，转换接头有多种形状可供选择。
IBC使用说明：
灌装FILLING

◆ 打开顶盖，插入外径小于142mm的管子实施灌装。
Remove top lid,put in a pipe which outer diameter is less than 142mm to fill.
◆ 本容器公称容积为1000升，灌装温度小于60℃。
Nominal volume of the container is 1000 liters and filling temperature is less than 60℃.
◆ 运输前拧紧所有密封件，盖好阀门挡板。
Tight all closures and put the valve cover door on position before shipment

排液DISCHARGE

◆本容器采用自重式排料设计。排液时，首先打开顶部灌装口盖；
The container is designed to discharge liquid by gravity。When discharging liquid ,remove top lid first.
◆旋下排液阀的盖子。如使用弯管，请将其套在阀门放料口的外螺纹上，并用手拧紧；
Remove sealing cap from the discharge valve。When using discharge tube, please?screw it onto the outlet of valve, and tighten it.
◆卸下排液阀手柄下侧的塑料销子，并轻轻拉开锁扣, 将阀门手柄朝顺时针方向扳动以开始排料；
Tack out the dowel in lower part of handle of the valve, and undraw the agraffe gently. Rotate handle of the valve clockwise to open valve to begin discharging.
◆排液完毕后，逆时针方向旋转以关闭阀门，使锁扣复位；
After discharging, please rotate handle of the valve counterclockwise to close the valve and restore the agraff.
◆旋上放料口封盖和灌装口盖。
Install the valve cover and the top lid.

化学相容性的确认Affirm the chemical compatibility

◆使用时应注意所灌装的液体与本容器原材料高密度聚乙烯的化学相容性，如对相容性有疑问，欢迎垂询；对于自行灌装未经我方确认的内装液所造成的相容性问题我方不承担责任。
Users should notice the chemical compatibility of the liquid going to be filled and the raw material of IBC – high density polyethylene. Any question about chemical resistance, please contact with us. If any filling goods not affirmed by us are filled, we do not respond about any problem caused by chemical resistance.

储存Storing

◆集装容器应存放在清洁、远离热源的地方，避免暴晒。
The container should store at a clean place far away heat source , avoiding violent sun.
◆容器的储存保质期为自生产之日起二年。
The storage life of container is 2 year since the production date.

运输及装载Transporting and Loading

◆使用本容器包装危险货物长途运输时，务必执行《国际海运危险货物规则》补充本中《货物运
输组件（CTUs）的装载指南》的各项规定。
When transporting dangerous goods packed in IBC, user should carry out various regulations of《Loadguides of Cargo Transportation Units(CTUs)》in the supplementary book of《International for rules for dangerous goods exported by sea》.