上苑墙衣外墙腻子粉招抚宁县经销商
上苑墙衣外墙腻子粉招抚宁县经销商
上苑 墙衣
柔性抗裂外墙腻子说明
上苑柔性抗裂外墙腻子是一种经济实用型墙面找平材料。适用于室外砖混砂浆墙面，瓷砖翻新墙面批刮找平。柔韧抗裂，和易性好，施工性能优异，不会与任何涂料起反应。
主要成份：石英沙、白水泥等和进口添加剂。
消耗量：理论上2公斤柔性抗裂外墙腻子可以批刮一平方米（两遍）。实际用理因施工方法，墙面平整度的不同而不同。
搅拌：水的加入量以施工稠度为准，搅拌均匀后，放置10分钟，再进行搅拌即可使用。不可以加入其他材料混合使用。
基层处理：基层坚实无浮灰和污物，墙体表面含水率低于5%。如果墙面平滑或疏松，需进行表面处理，待干将后方可批刮821刮墙腻子。
批乱找平：腻子找平应在半干状态下（用的轻压不变形）完成，固化后可用砂布找平。批刮腻子厚度应大于0。5MM（夏委），腻子批刮厚度超过2MM应分次批刮，每次批刮厚度不超过2MM。批刮过厚易出现干缩开裂。
执行标准：技术标准：JG/T3049 （Y）：环保标准：GB18582-2001。
施工温度：施工环境温度5度以上，固化过程温度不低于0度。
贮存和运输：存放阴凉干燥处，保持期6个月，产品无毒不燃，贮存运输可按（非危险品规则）办理。
Shangyuan rou xing kang lie wai qiang Ni Zi for interior wall is an economic and effective wall surface leveling material,used for scrap-ingand leveling of brick&concrete wall surface.Thpure white putty enjoys high placeabliity and umique workability.lacquer putty,which has passed the certification for Hhina enviromenr labei produc,is recognized as an environment-friendly green producr.
Principal components:Gypsum,calcium carbonate and additives.
Consumption:Theorestically,one-kilogran putty can cover an area of one square meter(twice)The acrual consumption varies with the comstructionmethod and smoothness of the wall surface.
Mixing:The quanrity of warer added depends on the consistecy applied.put it aside for 10 minures after mixing it evenly . Stir it agani and it isready to serve. No.other materisls are allowed to mix with it for us .
Base:treatment:The base should be solid ,and free from dust and dirt, The water content of the wall surface should be under 5%.if The wall srface is smooth or loose, Wall Sticker JC500should be applied for interface treatment.
Scraping and leveling:The putty should be made level when it is in a seni-dry state(i.e.until on distortion appears when it is slightly pressedwiht hand).After being solidified, it can be nade level with abrasive cloht. The thickness of sutty scraped should execeed 0.5mm.
Appiicable standard:Thchnical standard:JG/T3049(Y):
Quantity limitation stand ard of hazardous materisls GB18582-2001
Construction temperature:Costruction ambient temperature should be above 5S and the temperature dring the solidificationshould be on less than 0C.
Storage and transportation:kept in a cool and dry place. Service life is 6 months. The producr is nontoxic and noncornbustible. Refer to the Rules of Non-hazardous Goods for storage and transportation.
