'
电源#全汉FSP180-50PLA网络安全多网口服务器嵌入式工控机1U-Flex
Model Name| FSP180-50PLA |
Wattage| 180W |
Dimension| 150mm (L) × 81.5 mm (W) × 40.5mm (H) |
Product Highlight| Efficiency Level | Non-80+ |
| Altitude | 2000M |
| PMBus | For standard, advanced server, NAS and industrial power system. |
General Specification| Effciency | 68% |
| Voltage Regulation | -12V, +3.3V, +5V: ±5%
-12V: ±10% |
| PWOK Delay Time | 500ms > PWOK > 100ms |
Input Electrical Specification| Input Frequency | 47 ~ 63 Hz |
| Input Current | 115V@ 4.0 Amps-rms maximum
230V@ 2.0 Amps-rms maximum |
Output Specification| Hold-up time | 115V/60Hz 17mSec. Minimum@100% Load,
230V/50Hz 17mSec. Minimum@100% Load |
| Ouput Voltage Regulation | +3.3Vdc output : +3.7 Vdc minimum, + 4.5Vdc maximum
+5Vdc output : +5.7 Vdc minimum, + 6.5Vdc maximum
+12Vdc output : +13.3 Vdc minimum, + 15.6Vdc maximum |
| Ripple & Noise | 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum |
| Over current protection | 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p |
| Short Circuit Protection | load < 0.1 Ohm |
Environmental Requirement| Temperature Range | Operating : 0 to +50℃
Storage :-20 to +80℃ |
| Humidity | Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing |
| MBTF | The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage |
Safety| CE,FCC,TUV,UL/cUL,CCC |
Output Voltage and Current Rating
+3.3V+5V+12V1-12V+5Vsb
Ripple-Noise(R-P) mV| 50mV | 50mV | 120mV | 120mV | 50mV |
Regulation Load %| ±5% | ±5% | ±5% | ±10% | ±5% |
Output Max.(A)| 14A | 16A | 14A | 0.5A | 2A |
Output Min.(A)| 0.3A | 0.3A | 1.5A | 0A | 0A |
Notes
- 5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
- The +3.3V and +5V total output shall not exceed 90 watts.
- The total output shall not exceed 180 watts
'
