pe保护膜按粘力分主要为： 超低粘保护膜、低粘保护膜、中低粘保护膜、中粘保护膜、高粘保护膜、超高粘保护膜

1. 超低粘保护膜(即微底粘):

特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1500),基材(PE),剥离强度(≤5g/cm),耐温(60),拉伸率(>400)

用途: 使用方便易贴易撕,无残胶现象,适用于有机板材,仪器仪表,显示屏,玻璃镜片,塑料镜片等.

2. 低粘保护膜

特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(10-20g/cm),耐温(60),拉伸率(>400)

用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象,适用于钢镜板,钛金属,光面塑胶板,丝印,铭名牌等.

3. 中低粘保护膜

特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(30-50g/cm),耐温(60),拉伸率(>400)

用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象,适用于家具宝丽板,不锈钢板, 瓷砖、云石、人造石材等.

4. 中粘保护膜

特性: 厚(≥0.05±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(60-80g/cm),耐温(60),拉伸率(>400)

用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象, 适用于细纹磨砂板和一般难粘材料表面保护等.

5. 高粘保护膜

特性: 厚(≥0.05±0.003), 宽(≤1.3),高(100-800),基材(PE),剥离强度(80-100g/cm),耐温(60),拉伸率(>400)

用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象, 适用于细纹磨砂板,铝塑板,难粘塑料板材等.

6. 超高粘保护膜

特性: 厚(≥0.04±0.003), 宽(≤1.3),高(100-800),基材(PE),剥离强度(100g/cm以上),耐温(60),拉伸率(>400)

用途: 粘性特高,选用水性丙烯酸作压敏胶,使用方便,易贴易撕,无残胶现象.适用于粗纹铝板等难粘材料

pe protective film by stick force of mainly: ultra-low viscosity protective film , protective film of low viscosity , low viscosity protective film , protective film in the sticky , viscous protective film , super sticky protective film
An ultra-low viscosity protective film ( ie micro- bottom stick ) :
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1500 ) , the substrate (PE), the peel strength (≤ 5g/cm), temperature ( 60 ) , an elongation ( > 400 )
Use: Easy to use and easy to paste tear , no adhesive residue phenomenon for organic sheet , instrumentation , display, glass lenses, plastic lenses , etc.
(2) low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (10-20g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon for steel mirror plate , titanium metal , glossy plastic plates, screen printing, Ming brand and so on.
3 low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (30-50g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon , for furniture Polaroid plate, stainless steel , ceramic tile , marble , artificial stone and so on.
4 . The sticky protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (60-80g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board and general difficult to stick surface protection.
5 . Viscous protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (80-100g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board, plastic plates, plastic sheets and other difficult to stick .
6 ultra- sticky protective film
Characteristics : Thickness (≥ 0.04 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (100g/cm above ) , temperature ( 60 ), an elongation ( > 400 )
Purpose : ultra-high viscosity , the choice of water-based acrylic pressure-sensitive adhesive for easy to use, easy to paste and easy to tear , no adhesive residue phenomenon for coarse grain aluminum so difficult to stick materials.