适用于:商场、超市、学校、医院、酒店、停车场、办公楼、工厂车间、地下通道、市政工程、家居照明等。
二、产品特色
1. 节能环保，无紫外线、红外线和汞污染；
2. 铝型材＋优质PC面罩，抗冲击力强，光线柔和不刺眼睛；
3. 高透光率面罩，发光面均匀，无暗斑，无LED光源颗粒感；
4. 采用特殊的封装和散热工艺，持续工作稳定性高；
5. 可频繁开关启动，无闪烁和眩光现象，显色性能好；
6. 外观精美，款式新颖，便于安装和运输；
7、内置恒流驱动，更好更稳定的的保证了产品的质量；
特点：具有对温度与移动物体的感应识别功能，当有人、车、或者动物等通过灯具感应距离范围内就自动启动满功率亮灯，在延长时间过后没人或者其它移动物体时就转为微亮2W-4W的节能状态，保持监控摄像的需要。
感应距离：8-10米
感应时间：可根据客户要求调试
三、产品参数
产地：中国深圳
品牌：佛斯特
包装方式：纸筒或珍珠棉
整箱数量：30pcs
外箱体积：127＊22＊24(cm)
型号：T8人体红外感应
类型：LED室内照明
规格：0.6M/0.9M/1.2M/1.5M
功率：9W/12W/15W/18W/20W/22W
输入电压：AC85-265V/100-240V
灯珠：2835贴片
色温：3000K/4500K/6000K
尺寸：29*1198(mm)
外壳材质：铝材＋PC罩
寿命：＞50000H
安装方式：G13灯头
防护等级:IP20
四、产品按装方式
1. 在安装前请确保关闭电源。
2. 本产品LED灯管防护等级为IP20，仅限室内使用，不适合用于室外照明和荧光灯应急照明系统。
3. 必须由专业人员根据相关电力细则（100V～240V/50/60Hz）安装本产品LED灯管。
4. 为确保安全，请不要改变 LED灯管的结构。
五、产品发货
1.纸筒、珍珠棉包装可用厂家外箱或根据客户需求包装。
2.大货看产品数量一般8-10天可发货，样品可当天发货。
3.产品认证：CE FCC ROHS 可出口到大部分国家。
1：Application for shopping mall,super market,school,hospital,hotel,parking lot,office buildings,urban underground passage,factory workshop,municipal engineering and family
2：features
※ Aluminum heat-sink base can dissipate more heat and lead to a longer life span.
※ Adopt PWM constant current driver to ensure long light service and decrease the wane of light. Moreover each single LED work separately,then improve the working stability of the product.
※ The product can replace traditional T8 tube,directly connect to 85V or 265V but no need additional parts.No need to use starter and ballast,without stroboflash,long life to be over 50000 hours,really a green product.
3：specifications
origin：Shenzhen, China
brand：First
Type：Indoor lighting
packaging：Paper tube with pearl cotton
Packing quantity：30
Carton size：127*22*24(cm)
Model：T8 LED Type：SMD2835
Lnput Voltage：AC100-240V/85-265V 50-60Hz Ra: >72
Rated Power：18W Luminous flux： W/100LM
The service life of the：>50000H Power Factor：0.95
Product size：29*1198(mm) Color Temp：3000K-6500K
4：OUR LED TUBE FEATURE
Heat sink: using new high quality aluminum ally with belt reflective surface design, and the surface is the thick layer oxidation process.
The internal structure: High thermal conductivity aluminum plate and radiator profiles, ensure heat to be heat dissipated out fast cooling requirements for heat dissipation for long life span.
The circuit boards: high thermal conductivity, ensuring high aluminum plate LED heat rapid transfer.
Light source: Using the high quality TaiWan ChiMei chips for the packaging to ensure high reliability 、stability and low light decay of the LED. Difference color temperature can be chosen to fulfill your need.
Tube PC lampshade: Adopted imported flame retardant PC material, higher transmittance of light, gentle lighting, uniform, not dazzling, and durable, not yellow during aging.
Insulated power supply (85_265VAC) and the insulated (100-240VAC) power supply, High conversion efficiency, power factor than reached 90%, over current, over voltage, high temperature protection function. Light start without delay no stroboscopic, pollution free power.
Power driver casing holder: Uses high temperature resistant, insulation, flame retardant PC materials to ensure the safety.
Packing: single tube adopt cylinder type packing OR EPE EPE FOAM Packing, more elegant appearance, packaging firmer, impact resistance force strong.
