东莞南城pet保护膜厂家模切找凯泰企业400-0769-530
pe保护膜 不同厂家所产的品质和性能参数相同的保护膜基本是可以替代使用的。所以选择保护膜，第一要看产品整体的品质，晶点要尽可能少，保护膜撕掉之后不能有残胶，保护膜贴上之后剥离力稳定，在产品搬运过程中，保护膜不会翘起和脱落。
一、市场最普遍见到的就是PET保护膜
光学级透明聚酯薄膜(PET)涂布特殊的保护胶后、再贴合厚度0.050m/m的透明聚酯(PET)离型膜所构成；拥有高度挺性，合适于中大尺寸FPD显示器且贴合时不易包覆空气产生气泡之特殊设计，可增加平面显示器之美观。表面硬化处理达3H、PET防刮保护膜耐候性佳、低黏着力且容易撕下，并有超高透光率之光学效果且移除后无残胶。
防刮屏幕保膜保存环境：于室内环境温度25℃，相对湿度65%。
最后建议使用者勤买及时用，不要存积过多，因为季节的转换，温、湿度的变化，均能够影响保护膜的质量。保护膜不宜暴晒，也不宜受潮，择通风处放置为宜。 肤浅介绍，请诸多的行家高手多多批评指教，提出宝贵意见。
保护膜的颜色和规格，可随使用者的要求订做，常用的颜色是白色、淡黄色。常用的规格有宽45、60、90、106公分，长度以米计，按使用者要求订做。东莞南城pet保护膜厂家模切找凯泰企业400-0769-530特点：在无尘工作中，静电膜的产生吸附空气中的灰尘和微粒子使不良率增加，防静电膜的特性将防止空气中灰尘与微粒子被产品表面吸附。
PP保护膜是以OPP为基材，单面涂布亚克力胶水并贴合离型膜而成（单层的不贴合离型膜）的塑料薄膜，OPP塑料薄膜膜面平滑透明度高,耐温耐候性佳，OPP塑料薄膜膜面平滑透明度高,耐温耐候性佳，
OPP薄膜表面能低，涂胶或印刷前需进行电晕处理。经电晕处理后，OPP薄膜具有良好的印刷适应性，可以套色印刷而得到精美的外观效果，因而常用作复合薄膜的面层材料。
OPP保护膜的主要特点：
1、透明度高，平整度好；
2、耐温性好，易变形， 具有一定的挺括度和柔韧性；
3、手感好，遮光，不易反粘；
4、防湿防潮性能优良，具有一定的阻氧，耐油性；
5、产品厚度：常用的有3C/5C/7C。
用途：
塑胶外壳、玻璃镜片、光学、光电、不锈钢板、铝片、音箱板、PC板、蕊片、喷涂板、液晶显示器、铜板、冷扎板、钛金板等高级材料表面保护，保护你的产品以免在运输生产及使用过程中表面受损。东莞辰泰包装材料有限公司长期供应日韩生产的高端PET保护膜，价格仅和国内生产的PET保护膜持平。因为货源的优势，所以可以做到长期有货，并且价格始终是最低的。欢迎同行及贸易商进货。1.五金行业：电脑机壳，镀锌板冲压，铝板，不锈钢板，钛金板 ，塑钢板，玻璃板，太阳能电池板等等。
2.光电行业：LCD液晶显示器，背光板，冷光片，薄膜开关，手机屏幕等等。 六、储存及包装运输 储存温度：5-35℃ 储存期：自生产日之日起六个月 包装：50kg塑料桶或200kg塑料桶 运输：汽车运输，属非危险品。
3.塑胶行业：ABS、PP注塑制品，PVC板材，亚克力板，仪表，塑胶镜片，喷漆件表面保护等等。
4.印刷行业：PVC、PC板，铝板，胶片等印刷铭板表面保护等等。
5.电线电缆行业：轴装铜线、半成品、成品、打卷成品的保护，可有效防止灰尘污染，有防氧化、防脏污作用。 特点：在无尘工作中，静电膜的产生吸附空气中的灰尘和微粒子使不良率增加，防静电膜的特性将防止空气中灰尘与微粒子被产品表面吸附。
6.电子行业，在生产的时候，一般都要用到保护做起的成品与半成品，在流水线上不容易出现划伤和碰坏！
7.手机数码行业，手机贴膜又称手机美容膜、手机保护膜，是可用于装表手机机身、屏幕的一种冷表膜。
pe protective film applications
1 hardware industry: computer case, galvanized plate stamping, aluminum, stainless steel, titanium plates, steel plates, glass, solar panels and so on.
2 optoelectronic industry:. LCD liquid crystal display, backlight, EL, membrane switch, the phone screen, and so on.
3 plastic industry:. ABS, PP injection molding products, PVC sheet, acrylic sheet, instrument, plastic lenses, painting surface protection and so on.
4 printing industry:. PVC, PC boards, aluminum, film and other printed nameplates surface protection, and so on.
5 wire and cable industry: copper shaft-mounted, semi-finished products, finished playing roll protection, can effectively prevent dust pollution, anti-oxidation, anti-soiling effect.
6. Electronics industry, at the time of production, generally start to be used in the protection and semi-finished products in the pipeline is not prone to scratches and break something!
7 digital mobile phone industry, also known as Mobile phone film Beauty film, mobile phone protective film is applied to a cold surface membrane fitted sheet phone body, screen
pe protective film by stick force of mainly: ultra-low viscosity protective film , protective film of low viscosity , low viscosity protective film , protective film in the sticky , viscous protective film , super sticky protective film
An ultra-low viscosity protective film ( ie micro- bottom stick ) :
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1500 ) , the substrate (PE), the peel strength (≤ 5g/cm), temperature ( 60 ) , an elongation ( > 400 )
Use: Easy to use and easy to paste tear , no adhesive residue phenomenon for organic sheet , instrumentation , display, glass lenses, plastic lenses , etc.
(2) low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (10-20g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon for steel mirror plate , titanium metal , glossy plastic plates, screen printing, Ming brand and so on.
3 low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (30-50g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon , for furniture Polaroid plate, stainless steel , ceramic tile , marble , artificial stone and so on.
4 . The sticky protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (60-80g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board and general difficult to stick surface protection.
5 . Viscous protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (80-100g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board, plastic plates, plastic sheets and other difficult to stick .
6 ultra- sticky protective film
Characteristics : Thickness (≥ 0.04 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (100g/cm above ) , temperature ( 60 ), an elongation ( > 400 )
Purpose : ultra-high viscosity , the choice of water-based acrylic pressure-sensitive adhesive for easy to use, easy to paste and easy to tear , no adhesive residue phenomenon for coarse grain aluminum so difficult to stick materials.
联系人：陈礼兵（先生）手机：13556790460
?电话：86-0769-83390822 ? ?82984581
?传真：86-0769-83390833
?阿里巴巴网站：
?辰泰公司网址：
?E-mail：jiatai1011@126.com
?厂址：东莞市常平镇桥沥马屋管理区
