Noisecom
NC1000 系列放大器噪声模块 Amplified Noise Modules
The NC1000 series modules produce white
Gaussian noise up to +13dBm. The high power modules are designed for secure
com-munication and signal jamming, while the low power modules with high crest
factor are used for signal impairment in BER, and jitter applications.
（NC1000系列模块产生高斯白噪声+ 13 dbm。高功率模块设计用于确保com-munication和信号干扰,而峰值系数高的低功率模块用于信号误码率障碍,和抖动的应用程序。）
Each module contains a hermetically
packaged noise diode that has been pre-selected for special performance
characteristics. The standard module is designed for a 50Ω load impedance.
（每个模块都包含一个气打包噪声二极管已经预先选择了特殊的性能特征。标准模块是专为50Ω负载阻抗。）
深圳市立维创展科技有限公司专业代理Noisecom 噪声模块，噪声二极管，噪声发生器等全系列产品，订货周期快，价格有绝对优势，欢迎来电咨询！
联系人：张宇 电话：15817297155
Applications 应用
CATV/HDTV
Signal jamming
Secure communications
Jitter applications
10 GigE, PCI Express
Specifications
High power
Up to +13dBm
Standard input Voltage +28VDC(Below 1.5GHz)
+15VDC(above 1.5GHz)
Operating temperature -35 ℃to +100
℃
Stirage temperature -65 ℃ to +150℃
Typical temperature
coefficient 0.025dB/℃
Supply voltage
sensitivity 0.25dB/1%
Output
connector SMA female connector
(BNC available as option)
Options 选项
NC1opt01 +15VDC
NC1opt02 +24VDC
NC1opt03 BNC female connector(NC1101A through
NC1110A only)
NC1opt04 0dBm output
(Package 2,NC1101A
through NC1110A)
Not available for
NC1124,NC1126 & NC1128
NC1opt05 TTL control “High”is on(add “T”)
NC1opt06 TTL control “Low” is on (add “IT”)
NC1opt07 Special frequency range(consult
factory)
High Power Modules 高功率模块
NC1101A 10Hz-20KHz
NC1103A 10Hz-500KHz
NC1105A 10Hz-10MHz
NC1107A 100Hz-100MHz
NC1108A 100Hz-500MHz
NC1109A 100Hz-1GHz
NC1110A 100Hz-1.5GHz
High Crest Factor
Modules 高波峰因数模块
NC1111A 1GHz-2GHz
NC1111B 1GHz-2GHz
NC1112A 20MHz-2GHz
NC1112B 20MHz-2GHz
NC1113A 10MHz-3GHz
NC1113B 10MHz-3GHz
NC1124A 2GHz-4GHz
NC1126A 2GHz-6GHz
NC1128A 10MHz-10GHz
