产品基本信息：
型号：oil 4 UH1-68 N
英文名称:Kluberoil 4 UH1-68 N
粘度等级：ISO VG
68
品牌/产地：克鲁勃，德国
包装规格及价格：20L/3580 200L/26000
类型：食品级润滑油
宝贝描述：
说明：Klüberoil 4 UH1-32...1500
N是用于食品加工润滑剂和制药业。他们满足的要求德国法律管辖食品和相关辅助设备（LMBG，秒5，第1句，1）和美国提出的要求证券交易委员会21
CFR“准则FDA的规定“和178.3570是符合要求NSF H1注册。Klüberoil4 UH1-68...1500
N油符合中电的要求。当测试在FZG齿轮试验台根据根据DIN51354，第2部分，A /8,3/90，油呈划伤负载>
12和具体损失重量<0.2毫克/千瓦时。特别是制定了在使用食品加工和制药产业，这些润滑油展良好的抗磨损和极压性能以及优秀lowtemperature特征。腐蚀防护性能这些油都是很好的作为是他们的老化和氧化稳定性。他们因此，有一个高抗剪切并没有泡沫。
应用：Klüberoil4 UH1用于润滑的摩擦点在食品加工和制药机械。它们尤其适合为鞭策，斜面和润滑蜗杆齿轮，轴承，主轴和关节，以及电梯，驱动器和在低温下输送链。
包装规格：20升罐200升鼓
英文：
Klüberoil 4 UH 1-32 N … 1500 N oils
Synthetic lubricating oils
for the food-processingand pharmaceutical industries
Description
Klüberoil
4 UH 1-32 N…1500 N oils
are lubricants for the food processing
and
pharmaceutical industry.
They meet the requirements of the
German law
governing food products
and associated ancillaries
(LMBG, sec. 5, para 1,
sentence 1)
and the US requirements set forth in
the "Guidelines of sec.
21 CFR
178.3570 of FDA regulations" and
are in line with the requirements
of
NSF H1 registration.
Klüberoil 4 UH 1-68…1500 N oils
meet the CLP
requirements. When
tested on the FZG gear test rig according
to DIN 51
354, part 2,
A/8,3/90, the oils showed a scuffing
load of > 12 and a
specific loss of
weight of < 0.2 mg/kWh.
Especially formulated for use
in the
food-processing and pharmaceutical
industries, these lubricating
oils exhibit
good antiwear and EP properties
as well as excellent
lowtemperature
characteristics.
The corrosion protection properties
of
these oils are very good as is their
ageing and oxidation stability.
They
also have a high resistance to shear
and do not
foam.
Application
Klüberoil 4 UH 1 oils are used for the
lubrication of
friction points in foodprocessing
and pharmaceutical machinery.
They are
especially suitable
for the lubrication of spur, bevel and
worm gears,
bearings, spindles and
joints, as well as of lift, drive and
conveyor
chains at low temperatures.
Application notes
When used in gears,
Klüberoil 4 UH
1 oils may be applied by immersion,
immersion circulation
or injection.
Drip-feed lubrication (e.g. for chains)
and application by
brush or oil can is
also possible.Klüberoil 4 UH 1 oils are miscible
with
mineral oils and polyalfaolefin
oils. However, we recommend
cleaning the
oil circulation system or
flushing it with the new oil prior to
using
Klüberoil 4 UH 1 for the first
time. Especially with a view to the
H1
requirements in the foodprocessing
industry, any mixing of
Klüberoil 4 UH
1 oils with non-foodgrade
lubricants should be avoided.
For permanent
temperatures at the
seal edge up to 100 °C, NBR
seals
(acrylonitrile-butadiene rubber) may
be used. For higher
temperatures, it
is safer to use FKM seals (fluorinated
rubber) instead.
It should be
noted that elastomers from one or
several manufacturers can
behave
differently. Therefore the data given
in the "compatibility with
elastomers"
table should be used for reference
purposes only. A
compatibility test
should always be carried out with
the elastomers which
are actually
used.
Viscosity selection for rolling bearings
and
gears
To select the correct oil viscosity,
observe the bearing
manufacturer's
instructions or refer to worksheet 3
from the Society of
Tribology (GfT).
For determining the correct viscosity
for gears, the
manufacturer's instructions
take priority.
Only in cases where there are
no
gear manufacturer's instructions, the
viscosity can be selected in
accordance
with the enclosed worksheet
"Klüberoil 4 UH 1 oils – selection
of
oil viscosity for gears".
Service temperature range*:
ISO VG 32 to
100
approx. - 35 °C to approx. 120 °C
ISO VG 150 to 460
approx. - 30 °C
to approx. 120 °C
ISO VG 680 to 1500
approx. - 25 °C to approx. 120
°C
When used for loss lubrication, the
lubricant may be exposed to
higher
temperatures, depending on the
relubrication intervals. We will
be
pleased to provide samples for testing.
* Service temperature
range:
Service temperatures are guide values which depend
on the
lubricant's composition, the intended
use and the application method.
Lubricants change
their consistency, viscosity or apparent
dynamic
viscosity depending on the mechano-dynamical
loads, time, pressure
and temperature. These
changes in product characteristics may affect
the
function of a component.
Minimum shelf life
The minimum shelf life is approx. 24
months if the
product is stored in the
original closed container in a dry
place.
Pack sizes
400 ml spray can (ISO VG 1500)
5 l canister
20 l
canister
200 l drum
运费说明：广东地区可货到付款，广东地区以外宝贝都走汽运公司，根据地区的远近，亲们收到宝贝的时间长短不一，还请各位亲们见谅！买家收货时请确认宝贝型号，规格和数量，看与所订购的宝贝是否一致，如不一致请马上联系我。运费由卖家承担，有些宝贝型号和图片不一致请各位亲们见谅，多谢各位亲们的支持。
公司主营：壳牌润滑油、美孚润滑油、克鲁勃特种润滑脂、BP润滑油、道达尔润滑油等国际知名品牌润滑油，种类包括：液压油、齿轮油、切削油、冷冻压缩机油、特种润滑脂、通用润滑脂、船舶用油等，本站主营：美孚（MOBIL）润滑油和壳牌(SHELL)润滑油及克鲁勃(KLUBER)特种润滑脂/油，如需其他品牌产品请来电或是用旺旺咨询，来电时还请亲们跟我说是在淘宝上看到的，谢谢！
如需开发票请联系客服人员。
公司资料：
公司名称：深圳市科玛润滑油有限公司
公司地址：深圳市宝安区龙华新区大浪赢家工业区
公司电话：0755-81489693
公司传真：0755-29767869
联系电话：13662228564
QQ：2656942741
联系人：陆权（先生）
