产品介绍：
Features & Benefits
- Bandwidths up to 200 MHz
- Up to 6000 V Differential (DC + pk AC)
- Up to 2300 V Common (RMS)
- Overrange Indicator
- Safety Certified
- Switchable Attenuation
- Switchable Bandwidth Limit
- Floating Measurements
- Switching Power Supply Design
- Motor Drive Design
- Electronic Ballast Design
- CRT Display Design
- Power Converter Design and Service
- Power Device Evaluation
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and urately make floating measurements.
TheTHDP0100 and P5210Ahave the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.
TheTHDP0200 and P5205Aare active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.
TheTMDP0200 and P5202Aare designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.
TheP5200Acan be used with any oscilloscope and enables users tosafelymake measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.
Connectivity OptionsThe TMDP and THDP Series probes are equipped with the TekVPI®interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing ess to all relevant probe settings and controls. These probes are designed to operate on TekVPI®oscilloscopes without requiring the TPA-BNC adapter.
The P52xxA Series probes are equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe®interface or to any oscilloscope when used with the 1103 TekProbe®Power Supply.
技术规格：
Characteristics
Probes with the TekVPI®Interface
CharacteristicTMDP0200THDP0200THDP0100
Attenuation | 25X / 250X | 50X / 500X | 100X / 1000X |
Differential Voltage | 250X: ±750 V 25X: ±75 V | 500X: ±1500 V 50X: ±150 V | 1000X: ±6000 V 100X: ±600 V |
Common Mode Voltage | ±750 V | ±1500 V | ±6000 V |
Maximum Input Voltage-to-Earth | 550 V CAT I 300 V CAT III | 1000 V CAT II 600 V CAT III | 2300 V CAT I 1000 V CAT III |
Bandwidth | 200 MHz | 200 MHz | 100 MHz |
Rise Time | <1.8 ns | <1.8 ns | <3.5 ns |
Slew Rate | <275 V/ns at 1/250 gain | <650 V/ns at 1/500 gain | <2500 V/ns at 1/1000 gain |
Input Impedance at the Probe Tip | 5 M? || <2 pF | 10 M? || <2 pF | 40 M? || <2.5 pF |
Typical CMRR | DC: > –80 dB 1 MHz: > –60 dB 3.2 MHz: > –30 dB 50 MHz: > –26 dB | DC: > –80 dB 1 MHz: > –60 dB 3.2 MHz: > –30 dB 50 MHz: > –26 dB | DC: > –80 dB 1 MHz: > –60 dB 3.2 MHz: > –30 dB 100 MHz: > –26 dB |
Cable Length | 1.5 m | 1.5 m | 1.5 m |
Probes with the TekProbe®Interface
CharacteristicP5200AP5202AP5205AP5210A
Attenuation | 50X / 500X | 20X / 200X | 50X / 500X | 100X / 1000X |
Differential Voltage | 500X: ±1300 V 50X: ±130 V | 200X: ±640 V 20X: ±64 V | 500X: ±1300 V 50X: ±130 V | 1000X: ±5600 V 100X: ±560 V |
Common Mode Voltage | ±1300 V | ±640 V | ±1300 V | ±5600 V |
Maximum Input Voltage-to-Earth | 1000 V CAT II | 450 V CAT l 300 V CAT ll | 1000 V CAT II | 2300 V CAT l 1000 V CAT III |
Bandwidth | 50 MHz | 100 MHz | 100 MHz | 50 MHz |
Differential Input Impedance | 10 M?, 2 pF | 5 M?, 2 pF | 10 M?, 2 pF | 40 M?, 2.5 pF |
Input Impedance between each Input and Ground | 5 M?, 4 pF | 2.5 M?, 4 pF | 5 M?, 4 pF | 20 M?, 5 pF |
Typical CMRR | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >30 dB 50 MHz: >26 dB | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >40 dB 50 MHz: >30 dB | ||
Cable Length | 1.8 m | |||
1. This is the maximum measurable range between the (+) and (–) input leads of the probe. Beyond these limits, the output could be clipped.2. The maximum common mode voltage and maximum input voltage-to-earth (RMS) are the maximum voltages that each input lead (+/–) can be from ground.
High-voltage Differential Probe.
Includes: 2 hook clips (AC280-FL), 2 pincer clips (AC283-FL), 2 alligator clips (AC285-FL), and 2 extension cables (196-3523-00).
Note: Please specify power cord option when ordering.
Power Plug Options (P5200A only)
OptionDescription
Opt. A0 | US power |
Opt. A1 | Euro power |
Opt. A2 | UK power |
Opt. A3 | Australian power |
Opt. A5 | Switzerland power |
Opt. A6 | Japanese power |
Opt. A10 | China power |
Opt. A11 | India power |
Opt. A12 | Brazil power |
High-voltage Differential Probes.
Includes: 2 hook clips (AC280-FL), 2 pincer clips (AC283-FL), 2 alligator clips (AC285-FL), 2 extension cables (196-3523-00), 2 test leads (TP175-FL), 1 high-voltage differential browser (THV-BROWSER), and 1 probe holder (TPH1000).
THDP0100 and P5210AHigh-voltage Differential Probes.
Includes: 2 probe tips, 2 large hook clips; 2 small hook clips; 2 probe heads (re-order kit number 020-3070-00).
Service Options
OptionDescription
Opt. C3 | Calibration Service 3 Years |
Opt. C5 | Calibration Service 5 Years |
Opt. D1 | Calibration Data Report |
Opt. D3 | Calibration Data Report 3 Years (with Opt. C3) |
Opt. D5 | Calibration Data Report 5 Years (with Opt. C5) |
Opt. R3 | Repair Service 3 Years |
Opt. R5 | Repair Service 5 Years |
196-3523-00: Extender Leads (1.5 m).
AC280-FL: Hook Clips.
AC283-FL: Pincer Clips.
AC285-FL: Alligator Clips.
020-3070-00: Hook Clip Kit.
Probe and essory Derating Table (Common Mode, relative to ground, when used with P52xxA Series probes)
essoryDescriptionTMDP0200 / P5202A450 V CAT I300 V CAT IITHDP0200 / P5200A / P5205A1000 V CAT II600 V CAT IIITHDP0100 / P5210A2300 V CAT I1000 V CAT III
196-3523-00 | 2x Extender Leads (1.5 m)
2300 V CAT I 1000 V CAT III | Standard
450 V CAT I 300 V CAT II | Standard
1000 V CAT II 600 V CAT III | Standard
2300 V CAT I 1000 V CAT III |
AC280-FL | 2x Hook Clips
1000 V CAT III 600 V CAT IV | Standard
450 V CAT I 300 V CAT II | Standard
1000 V CAT II 600 V CAT III | Optional
1000 V CAT I 1000 V CAT III |
AC283-FL | 2x Pincer Clips
1000 V CAT III 600 V CAT IV | Standard
450 V CAT I 300 V CAT II | Standard
1000 V CAT II 600 V CAT III | Optional
1000 V CAT I 1000 V CAT III |
AC285-FL | 2x Alligator Clips
1000 V CAT III 600 V CAT IV | Standard
450 V CAT I 300 V CAT II | Standard
1000 V CAT II 600 V CAT III | Optional
1000 V CAT I 1000 V CAT III |
020-3070-00 | Hook Clip Kit
2300 V CAT I 1000 V CAT II | Optional
450 V CAT I 300 V CAT II | Optional
1000 V CAT II 600 V CAT II | Standard
2300 V CAT I 1000 V CAT II |
TP175-FL | 2x Test Leads
1000 V CAT III 600 V CAT IV | Standard (TMDP0200)
550 V CAT I 300 V CAT III | Standard (THDP0200)
1000 V CAT II 600 V CAT III | Optional
2300 V CAT I 1000 V CAT III |
The P52xxA Series probes provide high-voltage differential measurement solutions for any oscilloscope.
图片展示：
拓展阅读：
/Item/Show.asp?m=111&d=137
联系方式：
深圳市金凯博电子有限公司 免费热线：400-0980-966官方网站：
服务承诺与免责声明
本店承诺所售产品为正品行货享受中国区所有厂家承诺服务与保修，假一赔十；
因厂家会在没有任何提前通知的情况下更改产品包装、产地、价格或者一些附件，本商铺所有产品的标价、描述、和图片仅供参考，本商铺不能确保产品标价与实际售价，客户收到的货物与商铺图片、产地、附件说明等完全一致，只能确保为品牌原装正品，支持全国联保，并且保证与当时市场上同样主流新品一致！
