产品介绍：
Features & Benefits
- <0.7 pF Total Capacitive Loading Minimizes Intrusion on Circuits
- 20 k? Input Resistance
- 6.5 Vp-pDynamic Range Supports a Broad Range of Logic Families
- General-purpose Probing Allows Flexible Attachment to Industry-standard Connections
- Connectorless Probing System Eliminates Need for Onboard Connectors
- Hardware Debug and Verification
- Processor/Bus Debug and Verification
- Embedded Software Integration, Debug, and Verification
No test and measurement solution is complete without probing and the consideration of its impact on your system and your measurement time. With the industry’s lowest probe loading, the P6400 Series logic analyzer probes protect the integrity of your signal – minimizing the impact on your design. The P6400 Series logic analyzer probes when used with the TLA5000 Series logic analyzers make sophisticated logic analysis available at an affordable price. Select from a variety of attachment mechanisms, including the high-density D-Max®Probing Technology that eliminates the need for onboard connectors.
- For applications where circuit board space is limited, the high-density P6450 offers the smallest available footprint and a quick connection mechanism.
- With low loading capacitance, the P6400 Series can urately acquire signals with faster edges without distorting the signal.
- Flexible general-purpose probing, with support for 0.100 in. and 2 mm pin spacing, low input capacitance, and essories for connecting to many industry-standard connections.
With the industry’s lowest capacitance, the P6800 and P6900 Series logic analyzer probes for the TLA7000 Series protect the integrity of your signal – critical for connecting to fast buses like DDR2 and DDR3 where low intrusion is key to the proper operation of your design. Select from single-ended and differential probes and a variety of attachment mechanisms, including the “connectorless” compression connection that eliminates the need for onboard connectors.
For applications where circuit board space is at a premium, the high-density P6900 Series with D-Max®Probing Technology offers the industry’s smallest available footprint. For debugging the signal integrity glitches common on fast buses, the P6900 Series works with the TLA7Bxx and TLA7ACx modules and their iLink™ Tool Set capability to provide iCapture™ simultaneous digital-analog acquisition. This allows you to clearly see the time-correlated digital and analog behavior of your design, without the extra capacitance and setup time of double probing.
For differential signaling applications where signal integrity is critical, the high-fidelity P6980 and P6982 are perfect for those applications where noise performance is critical. In addition, the P6980 and P6982 can support the small voltage swings that differential signaling often requires. The P6962DBL, when used with a TLA7000 logic analyzer with the TLA7Bxx module, supports digital validation and debug of DDR3 memory with data rates up to 1600 mega-transfers per second. For board designs that do not include high-density probe footprints, the P6960 with its companion flying leadset or the P6810 provide the flexibility required to meet many different debug needs.
技术规格：
CharacteristicsP6400 Series Probe Characteristics
General
Probe Type | Single-ended Data Single-ended Clock (General Purpose) | Single-ended Data Single-ended Clock (Compression 17-channel) | Single-ended Data Single-ended Clock (Mictor 34-channel) | Single-ended Data Single-ended Clock (D-Max®Probing Technology) |
Number of Channels | 17 | 17 | 34 | 34 |
mended Usage for: | Most general-purpose applications | Applications requiring good signal density and quick reliable attachment | Applications requiring many channels to be quickly connected in a small footprint | Applications requiring many channels to be quickly connected in a small footprint |
Attachment to Target System | Fits both 0.100 in. and 2 mm square pin configurations | Compression Elastomer | Amp Mictor 34 Channel Connector | D-Max®probing technology compression cLGA |
Probe Loading AC/DC | 2 pF/20 k? to 0 V (TLA5000) | < 0.7 pF/20 k? to 0 V (TLA5000) | 2 pF/20 k? to 0 V (TLA5000) | <0.7 pF/20 k? to 0 V (TLA5000) |
<2 pF/20 k? to 2.2 V (TLA600, TLA7N/P/Qx) | < 0.7 pF/20 k? to 2.2 V (TLA600, TLA7N/P/Qx) | 2 pF/20 k? to 2.2 V (TLA600, TLA7N/P/Qx) | < 0.7 pF/20 k? to 2.2 V (TLA600, TLA7N/P/Qx) | |
Input Range | –5 V to 8 V | |||
Max Voltage (Nondestruct) | ±15 V | |||
Cable Length | 1.8 m (6 ft.) | |||
General
Data | Differential | Single-ended | Single-ended | Differential | Single-ended | Single-ended | Single-ended | Differential | Differential |
Clock | Differential | ||||||||
Number of Channels | 34 | 34 | 17 | 34 | 34 | 34 | 34 | 34 | 17 |
Number of Probe Heads | 1 | 2 | 1 | 4 | 1 | 1 | 1 | 2 | 1 |
mended Use | General-purpose applications | Good signal density and quick reliable attachment | Data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) with good signal density | Full differential probing with good signal density | Best signal density and quick reliable attachment. Flying leads for general-purpose probing is optional | Data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) with the best signal density | Highest performance applications, such as the fastest data rate DDR memory | Full differential probing with the best signal density | Full differential with the best signal density for data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) |
Attachment to Target System | Fits both 0.100 in. and 2 mm square pin configurations | Compression Elastomer | D-Max®probing technology compression cLGA | ||||||
Probe Loading AC/DC | < 0.7 pF/20 k? to Ground | 0.5 pF/20 k? to Ground, typical | 0.7 pF/11.7 k? to Ground, typical | 0.5 pF/20 k? to Ground, typical | |||||
Analog Bandwidth | Module Dependent | ||||||||
TLA7Bxx module | 3 GHz through iCapture™ to analog out BNCs*1 | ||||||||
TLA7ACx module | 2 GHz through iCapture™ to analog out BNCs*1 | ||||||||
Input Range | –2.5 V to 5.0 V | –1.25 V to +2.5 V | –2.5 V to 5.0 V | ||||||
Max Voltage (Nondestruct) | ±15 V | ±7.5 V | ±15 V | ||||||
Cable Length | 1.8 m (6 ft.) | ||||||||
*1Analog bandwidth of P6960 is less with flying lead set attached.
Ordering InformationTektronix Logic Analyzer Probes
P6410 | 17-channel General-purpose Probe with Single-ended Data/Clock with Separable Podlets and essories
Includes: Podlet Holders, IC Grabbers, Ground Leads, Ground Tips, Extension Ground Tips, Probe Labels, Probe Instruction Manual |
P6419 | 17-channel High-density Compression Probe, with Single-ended Data/Clock and essories
Includes: Nut Bars, Elastomer Holder (Thin PCBs), Elastomer Holder (Thick PCBs), Probe Labels, Probe Instruction Manual |
P6434 | 34-channel High-density Mictor Probe with Single-ended Data/Clock and essories
Includes: Latch Housing Assembly (Edge-mount), Latch Housing Assembly (Vertical), Probe Labels, Probe Label Instructions, Probe Instruction Manual |
P6450 | 34-channel High-density D-Max®Probing Technology Probe with Single-ended Data/Clock and essories
Includes: Probe Retention Kit for D-Max®Probing Technology, Probe Labels, Probe Instruction Manual |
P6810 | 34-channel General-purpose Probe with Differential Clock, Differential Data, and essories
Opt. DL: Differential Flying Lead Set (196-3471-xx) |
P6860 | 34-channel High-density Compression Probe, with Differential Clock, Single-ended Data, and essories |
P6864 | 17-channel (optimized for quarter-channel mode) High-density Compression Probe, with Differential Clock, Single-ended Data, and essories |
P6880 | 34-channel High-density Compression Probe with Differential Clock, Differential Data, and essories |
P6960 | 34-channel Single-ended High-density Compression Probe with D-Max®Probing Technology, with Differential Clock, Single-ended Data, and essories
Opt 01: 34-channel General-purpose Flying Lead Set (196-3494-xx) |
P6962 | 34-channel (optimized for half-channel mode) Single-ended High-density Compression Probe with D-Max®Probing Technology with Differential Clock, Single-ended Data, and essories |
P6962DBL | 34-channel (optimized for half-channel mode) Single-ended High-density Compression Probe with D-Max®Probing Technology with Differential Clock, Single-ended Data, and essories |
P6964 | 34-channel (optimized for quarter-channel mode) Single-ended High-density Compression Probe with D-Max®Probing Technology with Differential Clock, Single-ended Data, and essories |
P6980 | 34-channel Differential High-density Compression Probe with D-Max®Probing Technology, with Differential Clock, Differential Data, and essories |
P6982 | 17-channel (optimized for half-channel mode) Differential High-density Compression Probe with D-Max®Probing Technology, with Differential Clock, Differential Data, and essories |
Language Options
Opt. L0 | English Manuals |
Opt. L99 | No Manuals |
Service Options
Please refer to the Service section at the rear of this document for information on Calibration and Repair options for these probes. |
essories
Nut Bar (used on <0.093 in. thick PCB), Bag of 2 | — | — | 1 | 020-2453-xx | — | — | — | — |
Elastomer Holder Assembly, Thin (used on <0.093 in. thick PCB), Bag of 2 | — | — | 1 | 020-2451-xx | — | — | — | — |
Elastomer Holder Assembly, Thick (used on >0.093 in. thick PCB), Bag of 2 | — | — | 1 | 020-2452-xx | — | — | — | — |
Probe Retention Kit for D-Max®Probing Technology | — | — | — | — | — | — | 1 | 020-2908-xx |
Sheet of Probe Labels | 1 | 334-9979-xx | 1 | 335-1007-xx | 1 | 334-9381-xx | 1 | 335-1990-xx |
1 Latch Housing Assembly, Edge-mount | — | — | — | — | 1 | 105-1088-xx | — | — |
1 Latch Housing Assembly, Vertical | — | — | — | — | 1 | 105-1089-xx | — | — |
High-resistance Adapter for use with General-purpose Probes*3 | 1 | TLAHRA | — | — | — | — | — | — |
Optional | ||||||||
One-to-Two Adapter | 1 each | 013-0280-xx | — | — | — | — | — | — |
1 each – AMP Mictor Connector, Surface-mount | — | — | — | — | 1 | 131-6134-xx | — | — |
21 each – AMP Mictor Connector, Surface-mount | — | — | — | — | 1 | 020-2228-xx | — | — |
Mictor-on-PCB to P6419 Probe Adapter | — | — | 1 | 020-2457-xx | — | — | — | — |
Compression-on-PCB to Mictor Adapter, 17 channel | — | — | 1 | 020-2455-xx | — | — | — | — |
Compression-on-PCB to Mictor Adapter, 34 channel | — | — | 1 | 020-2456-xx | 1 | 020-2456-xx | — | — |
*mend PEM KFS-256 or equivalent for >0.093 in. thick PCB.
*3Provides 1 M? input resistance for use in low-power applications.
Podlet Holders, Bag of 4 | 1 | 352-1097-xx | — | — | — | — | — | — |
1-ch Leadset, Single-ended and Differential | 2 | 196-3471-xx | — | — | — | — | — | — |
8-ch Leadset, Single-ended | 4 | 196-3470-xx | — | — | — | — | — | — |
SMT KlipChip Grabber Tips, Bag of 20 | 2 | SMG50 | — | — | — | — | — | — |
Nut Bar (used on <0.093 in. thick PCB) | — | — | 2 | 220-0255-xx | 1 | 220-0255-xx | 4 | 220-0255-xx |
Elastomer Holder Assembly, Thin (used on <0.093 in. thick PCB), Bag of 2 | — | — | 1 | 020-2451-xx | 1 | 020-2451-xx | 2 | 020-2451-xx |
Elastomer Holder Assembly, Thick (used on >0.093 in. thick PCB), Bag of 2 | — | — | 1 | 020-2452-xx | 1 | 020-2452-xx | 2 | 020-2452-xx |
Sheet of Probe Labels | 1 | 335-0345-xx | 1 | 335-0346-xx | 1 | 335-1017-xx | 1 | 335-0697-xx |
*mend PEM KFS-256 or equivalent for >0.093 in. thick PCB.
TLAHRA | High-resistance Adapter (18 channels) for P6810 |
020-2457-xx | Mictor-on-PCB to P6860 Probe Adapter |
020-2453-xx | Nut Bar for Thin Elastomer Holder Assembly (Bag of 2) |
P6900 Series Probe Retention Kit
Sheet of Probe Labels | 1 | 335-1208-xx | 1 | P6962: 335-1772-xx P6964: 335-1315-xx | 1 | 335-1956-xx | 1 | 335-1209-xx | 1 | 335-1313-xx |
P6900 Series Probe Retention Kit | 1 | 020-2908-xx | 1 | 020-2908-xx | 1 | 020-2908-xx | 2 | 020-2908-xx | 1 | 020-2908-xx |
Probe Adjustment Tool | 1 | 003-1890-xx | 1 | 003-1890-xx | 1 | 003-1890-xx | 1 | 003-1890-xx | 1 | 003-1890-xx |
Velcro Cable Manager (Bag of 2) | 1 | 346-0300-xx | 1 | 346-0300-xx | 1 | 346-0300-xx | 1 | 346-0300-xx | 1 | 346-0300-xx |
020-2539-xx | P6900 Series Probe Mounting Posts |
Service Options
Customers who choose a Tektronix product receive a support partnership focused on making the deployment and operation of their products essful. Tektronix support teams are committed to providing rapid response. A broad range of flexible services is available at the time of product purchase to meet customer service needs.
The following service options are offered for the TLA logic analyzer probes. | ||
Opt. CA1 provides a single calibration event or coverage for the designated calibration interval, whichever comes first | X | X |
Opt. C3 Calibration Service, 3 Years | X | X |
Opt. C5 Calibration Service, 5 Years | X | X |
Opt. D1 Calibration Data Report | ||
Opt. D3 Calibration Data Report, 3 Years (with Opt. C3) | ||
Opt. D5 Calibration Data Report, 5 Years (with Opt. C5) | ||
Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration and more). P6708, P6716, P6716S, P6960DBL, P6960HCD only | X | |
Opt. G5 Complete Care 5 Years (includes loaner, scheduled calibration and more). P6708, P6716, P6716S, P6960DBL, P6960HCD only | X | |
Opt. R3 Repair Service, 3 Years | X | X |
Opt. R5 Repair Service, 5 Years | X | X |
Opt. S1 On-site service, 1 Year | ||
Opt. S3 On-site service, 3 Years (with R or C options) | ||
Opt. R1PW Repair Service Coverage, 1-year Post Warranty | X | X (Not P6982) |
Opt. R2PW Repair Service Coverage, 2-years Post Warranty | X | X (Not P6982) |
Opt. R3DW Repair Service Coverage, 3 Years (includes product warranty period). 3-year period starts at time of instrument purchase | X | X (Not P6982) |
Opt. R5DW Repair Service Coverage, 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase | X | X (Not P6982) |
图片展示：
拓展阅读：
/datasheet/tektronix-logic-analyzer-probes-0
联系方式：
深圳市金凯博电子有限公司 免费热线：400-0980-966官方网站：
服务承诺与免责声明
本店承诺所售产品为正品行货享受中国区所有厂家承诺服务与保修，假一赔十；
因厂家会在没有任何提前通知的情况下更改产品包装、产地、价格或者一些附件，本商铺所有产品的标价、描述、和图片仅供参考，本商铺不能确保产品标价与实际售价，客户收到的货物与商铺图片、产地、附件说明等完全一致，只能确保为品牌原装正品，支持全国联保，并且保证与当时市场上同样主流新品一致！
