Ronan X55-600 Series I/P & P/I Transducers
RONAN X55系列电气转换器的基本型号有：
X55-600-GP-1-SM
X55-600-GP-2-SM
X55-600-GP-3-SM
X55-600-GP-1-DIN
X55-600-GP-2-DIN
X55-600-GP-3-DIN
X55-600-GP-1-M
X55-600-GP-2-M
X55-600-GP-3-M
X55-600-GP-1-D2
X55-600-GP-2-D2
X55-600-GP-3-D2
X55-600-N4-1-SM
X55-600-N4-2-SM
X55-600-N4-3-SM
X55-600-N4-1-DIN
X55-600-N4-2-DIN
X55-600-N4-3-DIN
X55-600-N4-1-D2
X55-600-N4-2-D2
X55-600-N4-3-D2
X55-600-EX-1-SM
X55-600-EX-2-SM
X55-600-EX-3-SM
X55-302
X55-304
X55-300型气电转换器
诺南X55-300型气电转换器将仪表气压转换为模拟电流或电压信号。两线制及四线制模块均具备5个常用输入范围，从3-15psig到0-100psig不等。固态传感器确保杰出的线性、可以忽略不计的磁滞、非常快速的响应时间以及杰出的温度稳定性。
气电转换器的电子部分可从充气底座上移除而不损失气压。这就简化了校准及定期维护程序，而且无需对空气管路进行排空。X55-300转换器易于安装及维护，其特点包括输出监测测试孔、空气损失报警、可调整设置点报警选项以及前部校准。
诺南X55-300系列PI转换器为仪表及过程控制计算机提供标准电流及电压信号。非标准信号格式同样可行，从而可避免特殊应用成本高昂的接口设计要求。
X55-600型电气转换器
诺南最新的X55-600电气转换器的特色为现场可选输入电流，其范围为4-20毫安及10-50毫安，可用于3-15psig、3-273-15psig以及6-30psig的标准输出压力。X55-600采用现金的固态技术，提供较大温度范围内高可靠性及杰出的输出精度。该设备振动敏感性非常低，可安装在任何方位。X55-600还有一个容量为3SCFM输出的扩容器，可在上压力输出加5psig以及最大80psig之气源压力下运行。输出压力通过封闭反馈回路布置中压电陶瓷束偏转来控制。施加输入电流后，输出压力传感器向压电陶瓷束供应比例电压，后者反过来控制输出压力。在反向动作模式下，压电陶瓷束的控制信号被反转，导致最大电流输入下最小压力输出。
在分范围模式下，放大器增益被翻倍，提供一般电流，如4-12毫安或12-20毫安下全范围输出压力。
I/P & P/I Transducers
Ronan offers complementary products for pneumatic control (I/P) and monitoring (P/I) applications; the X55-600 Series and the X55-300 Series respectively. Both use highly reliable solid-state pressure sensors and control elements to provide cost effective solutions with high accuracy, temperature stability, vibration resistance and easy installation and maintenance
Model X55-600 Series - Current to Pressure Transducer
Ronan’s X55-600 I to P Transducers provide dependable and accurate control of air pressures in various robust design packages. The wide dynamic range on the control elements and associated solid-state technology allow the circuitry to compensate, even when passageways become partially obstructed.
The technology and the “hard-to-plug” physical design allow contaminates to “blow through.”
Model Attributes:- Low air consumption
- No pre-regulator required
- Supply pressure to 120 PSI
- Vibration and shock resistant
- Mount in any position
Model X55-300 Series - Pressure to Current Converters
Ronan’s X55-300 P to I Convertors convert instrument air pressures to analog current or voltage signals. A solid-state sensor assures you of outstanding linearity, negligible hysteresis, quick response time and excellent temperature stability.
The electronics portion can be removed from the pneumatic base without loss of air pressure, allowing simple calibration and regular maintenance without purging the air lines.
Model Attributes:- Simple to install and maintain
- 5 ranges up to 100 PSIG
- Two- or Four-wire Models
- Insensitive to vibration
- Mounts in any position
