DOROT反冲洗阀特点:
Two DOROT three-way valve features:
结构简单,安装容易,液动控制灵敏
Simple structure, easy to install, hydraulic control
最大程度减少切换摩擦
Switch minimize friction
高可靠性
High reliability
耐腐蚀材质
Corrosion resistant material
迅速切换水流方向
Switch in the direction of flow
压力等级:PN10或PN25
Pressure rating: PN10 or PN25
最小运行压力:0.07MPa
Minimum operating pressure: 0.07 MPa
工作温度:金属:0~870C塑料:0~700C
Working temperature: metal: 0 ~ 870 c plastic: 0 ~ 700 c
DOROT两位三通阀整体式结构,结实可靠
Two DOROT three-way valve monolithic structure, strong and reliable
螺纹或卡口连接,易于安装和改造现有手动过滤器
Threaded or bayonet connection, easy to install and transform existing manual filter
可在线维修,不需要从管线上拆除
Can online maintenance, not need to be removed from the pipeline
水头损失低
Low head loss
反冲洗动作迅速,能快速切换水流方向
Anti flushing action quickly, can quickly switch in the direction of flow
抗锈蚀性强,可应用于污水处理、海水或中水循环系统
The corrosion resistance is strong, can be applied to wastewater treatment, water or water circulation system
隔膜阀的关闭与开启是通过来自管路的压力作用于增强橡胶隔膜实现的。
Diaphragm valve closing and opening is applied to enhance through the pipe from the pressure of rubber diaphragm.
当压力介质进入阀门控制腔,隔膜下压,关闭阀门通道,当控制腔压力排向大气或下游管道,隔膜上升,阀门通道被打开。
When pressure medium enters the control valve cavity, the diaphragm down, close the valve channel, when the control cavity pressure or downstream pipe into the atmosphere, the diaphragm rises, channel of valve is opened.
阀门没有阀杆、密封垫、定向座等,通道中运动的唯一部件就是隔膜,所以不存在锈蚀及抱死现象,具有更高的稳定性。
Not stem, valve seal, such as the orientation, the only part of the channel is the diaphragm, so there is no rust and lock phenomenon, has higher stability.
多种结构形式及控制形式,可适用于多种的流体控制需要。
Many kinds of structure forms and control form, can be applied to a variety of flow control needs.
此系列阀门是由管线压力启动,隔膜直接密封的阀门。
This series valve is the start line pressure, the diaphragm sealing valve directly.
可应用于水质处理等领域。
Can be applied to water treatment and other fields.
多若特反冲洗阀可由管道压力或外接压力源启动,通过加装电磁阀能够实现可编程控制,定时冲洗排污。
If more than, the flush valve may be started by the pipeline pressure or an external pressure source, by adding electromagnetic valve can achieve programmable control, regular washing sewage.
可根据过滤系统的工作状况及系统设定,自动在以下两种工作模式切换: 1、过滤模式:允许含杂质水流直接通过出水口流向过滤器。
According to the working conditions of filter system and system setting, automatic in the following two kinds of working mode switching: 1, filter pattern: allows directly through the outlet flow filter impurities in water.
2、水口之间通路断开,开启排污口,对过滤器进行冲洗,去除杂质。
Pathways disconnect between 2, shuikou, open outlet, to wash the filter to remove impurities.
| 流体介质 | 水 | 阀体材料 | 铸铁、铜、塑料 |
| 最高水温 | 金属:< 870C 塑料:< 700C | 尺寸范围 | 20~600mm 3/4"---24" |
| 压力级别 | PN16,PN25 | 连接方式 | 螺纹、法兰、卡接头 |
| 启动压力 | >0.07MPa | 使用寿命 | 塑料:30年 金属:50年(建议每8年更换一次隔膜) |
反冲洗阀特点:
Features:
结构简单,安装容易,液动控制灵敏
Simple structure, easy to install, hydraulic control
最大程度减少切换摩擦
Switch minimize friction
高可靠性
High reliability
耐腐蚀材质
Corrosion resistant material
迅速切换水流方向
Switch in the direction of flow
压力等级:PN10或PN25
Pressure rating: PN10 or PN25
最小运行压力:0.07MPa
Minimum operating pressure: 0.07 MPa
工作温度:金属:0~ 870C 塑料:0~700C
Working temperature: metal: 0 ~ 870 c plastic: 0 ~ 700 c
| 型号 | 材质 | 进出口径/连接 | 反洗排污口/连接 | 备注 | |||||||||
| 51-2X2 | 黄铜 | 2"BSP螺纹 | 2"BSP螺纹 | * | |||||||||
| 57-3X2 | 铸铁喷涂 | 3"法兰 | 2"BSP螺纹或卡口 | ● | |||||||||
| 57-4X3 | 铸铁喷涂 | 4"法兰 | 3"BSP螺纹或4"卡口 | ● | |||||||||
| 58-3X2 | 铸铁喷涂 | 3"卡口 | 2"BSP螺纹或卡口 | * | |||||||||
| 58-4X3 | 铸铁喷涂 | 4"卡口 | 3"BSP螺纹或4"卡口 | ● | |||||||||
| 58P-3X3 | 塑料 | 3"卡口 | 3"BSP螺纹或卡口 | ● | |||||||||
| 58P-4X3 | 塑料 | 4"卡口 | 3"BSP螺纹或卡口 | ● | |||||||||
* 备有现货 ●提前订货,供货期三个月