【Medical】MP1S-5220V
220W
Server ,Workstation ,Storage System ,IPC
190x81.5x40.3(mm)
7.48x3.21x1.59(inch)
INPUT CHARACTERISTICS：VOLTAGE：90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：3.5A (RMS) FOR 115 VAC / 2.0A (RMS) FOR 230 VAC
INRUSH CURRENT：70A MAX. FOR 115 VAC / 140A MAX. FOR 230 VAC
POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF
95% AT 115/230VAC, FULL LOAD
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 1.0 | 12 | ±5% | ±1% | 60mV |
| +12V | 2.0 | 16 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.3 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 10 | ±5% | ±1% | 60mV |
| +5VSB | 0.1 | 2.0 | ±5% | ±1% | 60mV |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
‧TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE –20℃~80℃
‧HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY：78~82% TYPICAL AT 115V, FULL LOAD
‧POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
‧OVER POWER PROTECTION：110～160% MAX
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V
‧OVER CURRENT PROTECTION; +3.3V→11~16A, +5V→13.2~19.2A, +12V→>16, <20
‧SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
‧SAFETY : TO MEET UL60601, TUV EN-60601, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22(EN55022) CLASS B
‧COOLING: 40mm DC FAN
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
