1.作用;

1. The role of;

   说到 JMA多阀控制器就不得不说多阀系统了,多阀系统是由多个阀门和一个控制器组成的水处理系统,通过控制器来控制阀门的开关来实现设备的各种工作状态.这里说的控制器就是JMA多阀控制器.

   composed of multiple valve and a controller of water treatment systems, through the controller to control the switch of the valve to realize all kinds of working state of the equipment. This controller is JMA many valve controller.

所以说,JMA多阀控制器是整个多阀系统的核心组件,用来控制整套设备的运行,正洗,反洗等各种状态.

So, JMA valve controller is the core components of the valve system, used to control the whole equipment operation, are washing, backwashing and other state.

此控制器是专门针对由多阀组成的过滤,软化,除盐等水处理设备而开发生产的多功能控制器.

This controller is designed in view of the filter is composed of multiple valve, softening, desalination, water treatment equipment, development and production of multi-functional controller.

目前，在水的过滤、软化、除盐等工艺中应用的自动控制装置多采用进口的全自动控制多路阀，此阀的设计是将自动控制器（相当于人脑）和执行操作的阀门（相当于人手）合为一体，在一定的条件下虽具有自动、简单的优点，但同时也存在着如下缺点：

At present, in the water filtration, softening, desalination technology in the application of automatic control device, such as imported full automatic control of multi-way valve, the design of this valve is automatically performed on the controller (the equivalent of the human brain) and valve (hand), under certain conditions it is automatic, the advantages of simple, but at the same time it still has the following disadvantages:

2.控制器的参数;

2. The parameters of the controller;

JMA多阀控制器标准配置：

JMA valve controller is more standard configuration:

复位运行——只要时间程序器处在工作位置，分配器就保证转回至工作位置；

Reset operation - processor in position to work as long as time, distributor will ensure that return to work location;

避免了下次再生过程中程序混乱。

Avoid the next program chaos in the process of regeneration.

机壳防护等级 —— 防水、放电、防震；

Casing protection grade, waterproof, shockproof, discharge;

电 源 —— 220VAC/50HZ；

Electrical source - 220 vac / 50 hz;

时间启动范围为一周内每天的任何时间；

Time to start the scope of any time every day for a week;

最多可调程序8个，设定时间10~9999秒，调整单位为1秒；

Eight most adjustable program, 10 ~ 9999 seconds, setting time adjustment unit to 1 second;

就地强制启动按键；

In situ forced start button;

运行/再生状态灯光显示；

Run/regeneration status lights display;

可在某个程序或某些程序中输出干接点或电接点信号；

Can be dry contact output in a program or programs or electric contact signal;

·JMA多阀控制器配合参数：

JMA valve controller to cooperate more parameters:

电源 ： 220VAC/50HZ，10W功率

Power supply: 220 vac / 50 hz, 10 w power

远传启动信号 ：最小2秒钟的无源接点信号

Far eastone start signal: minimum 2 seconds of passive contact signal

分配器接口尺寸：1/8”G螺纹

G thread distributor interface sizes: 1/8"

v压力信号源 ：气体或液体（建议安装100μ过滤器）

V pressure source: gas or liquid (suggest install 100 mu filters)

控制源压力 ：0.2~ 0.8MPa

Control the source pressure: 0.2 ~ 0.8 MPa

工作温度 ：4~60 ℃

Working temperature: 4 ~ 60 ℃

控制器外壳尺寸：270X170X105mm

X170x105mm controller shell size: 270

3.JMA多阀控制器如何选择型号;

3. JMA valve controller is how to choose more models;

此控制器一共有十多种型号,每种都用在不同的设备上,不能通用.

This controller has a total of ten variety of models, each in different devices, not universal.

JMA 501 过滤器

The JMA 501 filter

JMA 502 稀流再生软化器

JMA 502 softener dilute flow regeneration

JMA 503 过滤器

The JMA 503 filter

JMA 505 逆流再生软化器

JMA 505 counter-current softener regeneration

JMA 506 3罐过滤器

JMA 506 3 tank filter

JMA 507 4罐过滤器

JMA 507 4 tank filter

JMA 508 5罐过滤器

JMA 508 5 tank filter

JMA 523 双罐过滤器一用一备

JMA 523 double tank filter with a case

JMA 524 稀流再生软化器

JMA 524 softener dilute flow regeneration

JMA 525 稀流再生软化器

JMA 525 softener dilute flow regeneration

JMA 526 稀流再生软化器

JMA 526 softener dilute flow regeneration

JMA 527 双罐过滤器并联

The JMA 527 double tank filter in parallel

JMA 528 稀气擦洗过滤器

Scrubbing JMA 528 thin air filter

JMA 529 盐回用软化器

The JMA 529 salt recycling softener

JMA 530 6罐过滤器

JMA 530 6 cans of filter

JMA 531 7罐过滤器

The JMA, 531 tank filter

来教下大家如何选择JMA多阀控制器型号吧.在这我们只说最常用的两种:JMA502多阀控制器和JMA505多阀控制器;

To teach you how to choose the JMA valve controller more models. In this we only said two of the most commonly used: JMA502 valve controller and JMA505 valve controller;

JMA502多阀控制器是用在顺流软化水设备上的,JMA505多阀控制器用在逆流软化水设备上.

JMA502 valve controller is used in more downstream softened water equipment, JMA505 much valve control is used in the countercurrent demineralized water equipment.

当盐水从罐子顶端进入时(5#阀在进水管上面)就用JMA502多阀控制器

When the salt water from the top of the pot into the (5 # valve in the feed line above) with JMA502 valve controller

当盐水从罐子底端进入时(5#阀在进水管下面)就用JMA505多阀控制器

When the brine from the tank bottom (5 # valve in the feed line below) with JMA505 valve controller

很多客户购买JMA多阀控制器时都不知道JMA多阀控制器的型号,产品本身也没写.所以,当您不知道型号时,您一定要有那套水处理设备的照片,以便我们来帮您确认.

Many customers don't know when buying a valve controller JMA JMA valve controller models, the more he didn't write the product itself. So, when you don't know type, you must have a photo of the set of water treatment equipment, so that we can to help you confirm.

4.JMA多阀控制器的操作说明;

More than 4. JMA valve controller instructions;

JMA多阀控制器所有可以定义的参数包括：

JMA valve controller all can define parameters include:

   1.计划       2.M程序        3.S程序        4.商务    

1. The plan 2. 3 M program. 4 S application business

 多台控制器可实现外围逻辑连锁程序功能.即多台控制器之间可能S1或S3程序作为相邻两台设备的状态反馈,从而实现彼此之间的相互连锁,从工艺上避免了两台控制器同时启动再生程序.

More than one controller can realize the peripheral logic chain program function. That is more between controller may S1 and S3 program as the state feedback between two sets of equipment, so as to realize the chain, each other from the process to avoid the two controllers at the same time start the regeneration program.

JMA多阀控制器不需要单独的控制柜;

JMA valve controller does not need to separate control cabinet;

压力管安装的话,只要知道阀门的序号,让阀门的序号与JMA多阀控制器接管处的序号相连就好了,如不知道阀门序号也可来电我公司咨询

Pressure pipe installation, as long as know the serial number of the valve, make the valve serial number and JMA valve controller to take over more connected to the serial number, if you don't know the valve serial number can also be to our company advisory

电路安装部分稍复杂点,单罐系统和多罐系统接法也不一样,在这里没法说得清.

Circuit installation part a little complicated, single tank system and tank system connection is different also, here can't speak clearly.

必需要配合图片才能讲清,请大家谅解.有不明之处请至电我公司查询.

Must match the picture to tell me, please understand. Have the unclear place, please contact to phone my company.

维护和保养;

Maintenance and maintenance;

工作环境:JMA多阀控制器不能在阳光直射和有雨水情况下使用,周边温度也要控制在1-50度,否则控制器可能出现死机的情况.

Working environment: JMA valve controller cannot be used in the case of direct sunlight and rain, the surrounding temperature control in 1-50 degrees, otherwise the controller is likely to crash.

使用电压为220VAC,50/60HZ.通电前,测量电压应不高于250VAC.过高或波动太大时应加装稳压电源,同时有良好的接地保护,否则出现的损坏将不属于保修范围..

Using voltage is 220 vac, 50/60 hz. Before electricity, measure the voltage should be not higher than 250 vac. Too high or too much volatility should be equipped with regulated power supply, have good grounding protection at the same time, otherwise the damage will not belong to the warranty scope..

S1,S2,S3,C1,C2为无源常开触点,其负载功率小于20W时可直接连接使用,大于20W时必须选用继电器过渡,用来控制电磁阀等负载.

S1, S2, S3, C1 and C2 for passive normally open contacts, the load power is less than 20 w can be connected directly to use, more than 20 w must choose relay transition, when the solenoid valve used to control load, etc.

JMA多阀控制器基本不需要什么维护,,产品的质量就是其最好的维护.全部进口级的材料为控制器更添加了一层保护.

JMA valve controller is more basic don't need maintenance, and the quality of the products is the best maintenance. All level of imported materials for the controller more add a layer of protection.