电磁阀从原理上分为类
原文:
电磁阀从原理上分为类: 1、进口直动式电磁阀:通电时,电磁线圈产生电磁力把关闭件从阀座上提起,阀门打开;断电时,电磁力消失,弹簧把关闭件压在阀座上,阀门关闭。
2、进口分步直动式电磁阀:一种直动和先导式相结合的原理,当入口与出口没有压差时,通电后,电磁力直接把先导小阀和主阀关闭件依次向上提起,阀门打开。当入口与出口达到启动压差时,通电后,电磁力先导小阀,主阀下腔压力上升,上腔压力下降,从而利用压差把主阀向上推开;断电时,先导阀利用弹簧力或介质压力推动关闭件,向下移动,使阀门关闭。
3、进口先导式电磁阀:通电时,电磁力把先导孔打开,上腔室压力迅速下降,在关闭件周围形成上低下高的压差,流体压力推动关闭件向上移动,阀门打开;断电时,弹簧力把先导孔关闭,入口压力通过旁通孔迅速腔室在关阀件周围形成下低上高的压差,流体压力推动关闭件向下移动,关闭阀门。
译文: 订货须知: 一、若订货前还未选定型号,请向我们提供您的使用参数:1.公称通径 2.产品型号 3.流体性质(包括公称压力、温度、介质) 4.阀体、密封材料 5.连接方式 6.传动方式. 二、若已经由设计单位选定我公司的产品型号,请按型号直接向我司销售部订购; 三、当使用的场合非常重要或管路比较复杂时,请您尽量提供设计图纸和详细参数,由我们德国莱克阀门专家为您审核把关。 四、感谢您访问我公司的网站〖〗,如有任何疑问.您可以致电给我们《020-61132877,13826088101》我们一定会尽心尽力为您提供优质的服务。
Solenoid valve in principle can be pided into three categories: 1, direct acting solenoid valve: electricity, electromagnetic coil to produce electromagnetic force to shut down from the seat lift, the valve opening; Power, the electromagnetic force disappears, press on the seat, spring to close valve door closed. < br / > 2, step by step, direct acting solenoid valve: a direct acting and pilot operated the principle of combining when the inlet and outlet no pressure difference, after electrify, electromagnetic force directly to combine small pilot valve and main valve closed in the filed, open the valve. When the inlet and outlet at startup pressure difference, after electrify, the electromagnetic force small pilot valve, main valve inferior vena pressure rising, the cavity pressure drop, which using differential pressure to the main valve opened up; Power cuts, pilot valve using the spring force or medium pressure push off, move down, to close the valve. < br / > 3, guiding type solenoid valve: when electricity, electromagnetic force open the pilot hole, the chamber pressure drops rapidly, in closed form around the high low differential pressure, fluid pressure push close the upwardly mobile, valve opening; Power off, the spring force to close the guide hole, inlet pressure chamber through the bypass Kong Xun speed on formation and low around the valve parts high differential pressure, fluid pressure push shut down move, close the valve.
动作方式: 先导型、直动型
线圈工作温度:<+50℃、<+85℃
控制方式:常开式、常闭式
国际标准电压:AC(380、220、110、24)V、DC(220、110、24、12)V
流通流体介质:水、气、油等
流通流体温度:<-200℃、<-100℃、<-40℃、<+60℃、<+120℃、<+200℃ 、<+350℃
流通流体压力:63bar、100bar、160bar、250bar、400bar、500bar、800bar、1000bar、
1500bar、1800bar、2500bar、3000bar、3600bar
阀体材质:不锈钢(304、316、316L)
连接方式:螺纹、法兰
泄漏量:零泄漏
注解:1、流体中若含有杂质,电磁阀进端必须安装过滤阀(30——80目/寸),且无凝固及结晶现象。
2、电磁阀安装方位无限制。(S-水平安装、C-垂直安装)
3、以上参数根据工况要求进行选择。