深圳鑫盈科润滑油贸易有限公司成立于二零零六年,是一家从事工业润滑油销售的贸易公司。 2008年底公司非常荣幸成为了壳牌润滑油授权经销商。同时也相继成为埃克森美孚、福斯工业润滑油的授权经销商。产品包括:液压油、齿轮油、导轨油 、防锈油、 切削油、润滑脂、合成齿轮油、合成润滑脂、高温润滑脂、绝缘油、冷冻、空气压缩机油 、涡轮机油、燃气发电机油、矿山设备用油、钢铁厂油膜轴承及循环系统油、船舶系统油。 销售服务热线:13926530627蒋先生,电话0755-28027380。
为了更好地服务客户,在市区,公司拥有400平方米的营业场地。几年来,经过全体员工不懈努力,公司实现了巨大的飞跃,润滑油销量高速增长,现已发展成为本地区进口品牌润滑油最大的供应商,并在行业中赢得了极高的信誉和良好的口碑。
作为世界一流品牌的润滑油经销商,要想赢得客户的长期信赖,就必须拥有充足稳定的货源。公司在深圳中心区建有 2000 平方米的润滑油储存仓库,备货相当充足,常年库存保持在 6000 桶左右,其中180公斤的包装超过 2500 桶, 18 升的包装近 3500 桶。仓储设施齐全,有数十个大型的润滑油货架和两辆专用的装卸叉车。公司还拥有十辆送货汽车,能够按用户的要求及时将润滑油产品送至用户指定地点。
在润滑油产品的经营中,为了将专门化的技术服务带给用户,公司购进了数台国外进口的润滑油专用服务设备,如:德国HYDAC公司生产的润滑油在线检测仪,美国 PALL 公司生产的润滑油过滤加注小车、油液净化、便携式清洁度等级检测仪等设备,能分别为客户在润滑油使用中提供过滤加注、油水分离、现场 NAS 等级检测服务。我们愿以专业的技术服务将自己打造成一流的润滑专家。
|
RENOLIN MR Multipurpose Lubricating Oil for Bearings, Gearboxes and Hydraulic Systems Multipurpose Lubricating Oil for Bearings, Gearboxes and Hydraulic Systems
Engine oils have to perform many different functions. They not only have to lubricate, i.e. reduce friction and wear but also to keep the machines clean, inhibit corrosion, seal and cool. In many cases only one of these functions is emphasized while the others are neglected. But one must actually consider all of these functions along with their interactions. The places were most wear and soiling takes place in an engine are the cylinder walls, pistons, rings, valves, distributor and oil pump drives, camshafts, tappets, rockers, all bearings and the sump. An oil must withstand a number of physical conditions, the most important of which being temperature. An oil is expected to perform satisfactorily from - 40 to + 300°C and in some conditions even above this temperature without losing its efficiency. The oil in an engine is mechanically contaminated by combustion residues (soot), abraded metal particles, dust and sand and chemically affected by oxygen, acids and water. The question is: Are these tasks and requirements only applicable to engine oils? and the answer is: No, all machinery lubricants have to fulfil similar requirements. Of course, the particular emphasis reflects the application in question.
The special RENOLIN MR oils are lubricants which satisfy the persity of such applications. RENOLIN MR oils were developed over 30 years ago but are still among the leading hydraulic and lubricating oils currently available. This is proof of the quality of these oils as well as confirmation of the foresight of FUCHS R + D laboratories which first developed these detergent hydraulic oils.
The RENOLIN MR series of oils offer the following advantages:
- Multipurpose lubricating oils
- Excellent corrosion protection (characteristics of conservation oils are given)
- Excellent cleaning and sludge transportation properties
- Friction and wear reducing
- Good resistance to ageing
Application:
RENOLIN MR multipurpose lubricating oils are recommended for the running-in of machinery, for functional tests and for operational lubrication. When factory-filled, RENOLIN MR oils guarantee running-in free of undue wear and seizures in addition to complete protection of machinery internals against corrosion even in difficult conditions such as overseas shipment. A further advantage is that the factory-filled oil can remain in the machine all the way through to the first routine oil change interval.
If the machinery cannot be delivered factory-filled, the RENOLIN MR oil film remaining after the functional test offers good corrosion protection to all wetted surfaces. When used for normal operation, RENOLIN MR oils reduce wear, avoid stick-slip or frictional vibration and protect against corrosion. Furthermore, they ensure that oil circuits remain clean.
RENOLIN MR oils are therefore recommended for machinery with low speed movements, if a good wetting film between cylinders and sealing elements is required as well as when machinery is exposed to unfavourable atmospheric conditions such as large temperature fluctuations and thus condensation formation, air-borne dust such as in foundries, in cement manufacturing plants or on construction sites and last but by no means least, for machine tools especially if water-miscible cutting fluids are used.
RENOLIN MR 0, MR 1 and MR 3 are heavy-duty spindle oils recommended for machine tools and textile machinery. RENOLIN MR 0 especially for grinding machine spindles rotating faster than 2,000 rpm. RENOLIN MR 1 for machine tool spindles turning between 600 and 2,000 rpm and for textile machine spindles revolving faster than 10,000 rpm. RENOLIN MR 3 for machine tool spindles turning under 600 rpm and for textile machine spindles revolving slower than 10,000 rpm.
RENOLIN MR 5, RENOLIN MR 10, RENOLIN MR 15, are heavy-duty hydraulic oils capable of withstanding continuous temperatures of over 100°C, even up to 120°C for short periods. They are recommended by leading manufacturers of hydraulic equipment and in some cases, factory-filled.
RENOLIN MR 10 is also suitable for power steering systems. RENOLIN MR 10, RENOLIN MR 15 and RENOLIN MR 20 are recommended for medium-duty transmissions, in particular those fitted with electromagnetic, multiple clutches. RENOLIN MR 30 and RENOLIN MR 40 are recommended for heavy-duty transmissions.
RENOLIN | | MR 0 | MR 1 | MR 3 | MR 5 | MR 10 | MR 15 | MR 20 | MR 30 | MR 40 | | Hydraulic oil type | | | | | | | | | | | | acc. to ISO 6743-4¹ | | | | HM 10 | HM 22 | HM 32 | HM 46 | HM 68 | HM 100 | HM 150 | | acc. to DIN 51 502¹ | | | | HLPD10 | HLPD 22 | HLPD 32 | HLPD 46 | HLPD 68 | HLPD 100 | | | Characteristics | Unit | | | | | | | | | | Test method | Colour | | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2.5 | 3.5 | ASTM D 1500 | Kinematic viscosity | | | | | | | | | | | | at 40 °C | mm²/s | 2.2 | 4.8 | 9.5 | 22 | 35 | 49 | 70 | 102 | 146 | ASTM D 445 | at 100 °C | mm²/s | 1 | 1.6 | 2.6 | 4.3 | 5.8 | 7.5 | 9 | 11.2 | 14.2 | ASTM D 445 | Viscosity index | | – | – | - | 100 | 107 | 116 | 102 | 95 | 95 | ASTM D 2270 | Density at 15 °C | kg/l | 0.825 | 0.843 | 0.86 | 0.878 | 0.883 | 0.884 | 0.885 | 0.892 | 0.898 | ASTM D 1298 | Flash point, Cleveland open cup | °C | 75 | 85 | 160 | 165 | 200 | 220 | 225 | 230 | 250 | ASTM D 92 | Pour point | °C | – 42 | - 36 | - 30 | – 30 | – 30 | – 27 | – 27 | – 21 | - 18 | ASTM D 97 | Neutralization number | mg KOH/g | | | | | 0.7 | | | | | ASTM D 974 | Saponification number | mg KOH/g | | | | | 2.4 | | | | | ASTM D 94 | Oxide ash | % mass | | | | | 0.27 | | | | | ASTM D 482 | Water content ASTM D 95 | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | | Insolubles DIN 51 592 | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | | Demulsification | min | non demulsifying | non demulsifying | non demulsifying | non demulsifying | non demulsifying | non demulsifying | non demulsifying | non demulsifying | non demulsifying | DIN 51 599 | Air release at 50 °C | min | 1 | 1 | 2 | 4 | 7 | 10 | 12 | 20 | 30 | ASTM D 3427 | Foaming, | | | | | | | | | | | | seq. I | ml | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | ASTM D 892 seq. I-III | seq. II | ml | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | ASTM D 892 seq. I-III | seq. III | ml | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | < 30/0 | ASTM D 892 seq. I-III | Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 | Rust prevention | | pass B | pass B | pass B | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | Ageing behavior, | | | | | | | | | | | | viscosity increase | % | | | 3 | 2 | 2 | 2 | 2 | 2 | 1 | ASTM D 2893 | precipitation number increase | ml | | | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | ASTM D 2893 | FZG mechanical gear rig test | load stage | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | DIN 51 354-2 | Vickers vane pump test, loss of mass | | | | | | | | | | | | on ring | mg | < 120 | < 120 | < 120 | < 120 | < 120 | < 120 | < 120 | < 120 | < 120 | IP 281 | on vanes after 250 h | mg | < 30 | < 30 | < 30 | < 30 | < 30 | < 30 | < 30 | < 30 | < 30 | IP 281 | Effect on SRE-NBR 1 seal material acc.to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, | | | | | | | | | | | | relative volume change | % | 20 | 18 | 17 | 14 | 11 | 9 | 8 | 7 | 7 | DIN 53 521 together with DIN 53 505 | change in Shore A hardness | Shore | – 9 | - 7 | - 6 | – 5 | – 3 | – 2 | – 2 | – 2 | – 2 | DIN 53 521 together with DIN 53 505
|
RENOLIN CLP 68 | 详细内容 | 齿轮油
产品名称性能概述及应用 RENOLIN UNISYN CLP 系列全合成聚烯烃基极压齿轮油。与矿物油完全相容,满足并超过DIN HC及ISO CKC等级,并取得FLENDER认可。 建议用于承受高压和工作温度波动大的轴承及齿轮箱润滑系统中。 RENOLIN CLP 系列高极压工业齿轮油。具有极强的极压抗磨和防腐蚀性能。符合美钢USS 224、美国齿轮制造商协会AGMA250.44及德国DIN 51517-3的规格。 特别适用于负荷处于波动的情况和齿面磨合期。 RENOLIN MR 系列齿轮箱磨合防锈油,具有极佳的抗极压,防腐防锈性能,可作为齿轮箱及机组的磨合油及防锈油。 RENOLIN MR 10 Z被ZF公司推荐用于动力转向试验台测试用油。 |
|
|
|
|
|
|