【大连销售200L 福斯RENOLIN ZAF 68 D液压油】价格_厂家

大连销售200L 福斯RENOLIN ZAF 68 D液压油

不限

￥1

中国深圳

产品属性

图文详情

品牌推荐

品牌

福斯

型号

ZAF 68D

品种代号(L-)

CKT

ISO粘度等级

包装规格

18L/200L

运动粘度(40℃)

645mm2/s

闪点(开口)

102℃

倾点

-24℃

凝固点

33℃

适用温度

321℃

外观

成分

122

性能

用途

良

参数名良

倾点℃

-42

时代

-42

个

深圳鑫盈科润滑油贸易有限公司成立于二零零六年，是一家从事工业润滑油销售的贸易公司。 2008年底公司非常荣幸成为了壳牌润滑油授权经销商。同时也相继成为埃克森美孚、福斯工业润滑油的授权经销商。产品包括:液压油、齿轮油、导轨油、防锈油、切削油、润滑脂、合成齿轮油、合成润滑脂、高温润滑脂、绝缘油、冷冻、空气压缩机油、涡轮机油、燃气发电机油、矿山设备用油、钢铁厂油膜轴承及循环系统油、船舶系统油。销售服务热线：13926530627蒋先生，电话0755-28027380。
为了更好地服务客户，在市区，公司拥有400平方米的营业场地。几年来，经过全体员工不懈努力，公司实现了巨大的飞跃，润滑油销量高速增长，现已发展成为本地区进口品牌润滑油最大的供应商，并在行业中赢得了极高的信誉和良好的口碑。

作为世界一流品牌的润滑油经销商，要想赢得客户的长期信赖，就必须拥有充足稳定的货源。公司在深圳中心区建有 2000 平方米的润滑油储存仓库，备货相当充足，常年库存保持在 6000 桶左右，其中180公斤的包装超过 2500 桶， 18 升的包装近 3500 桶。仓储设施齐全，有数十个大型的润滑油货架和两辆专用的装卸叉车。公司还拥有十辆送货汽车，能够按用户的要求及时将润滑油产品送至用户指定地点。

在润滑油产品的经营中，为了将专门化的技术服务带给用户，公司购进了数台国外进口的润滑油专用服务设备，如：德国HYDAC公司生产的润滑油在线检测仪，美国 PALL 公司生产的润滑油过滤加注小车、油液净化、便携式清洁度等级检测仪等设备，能分别为客户在润滑油使用中提供过滤加注、油水分离、现场 NAS 等级检测服务。我们愿以专业的技术服务将自己打造成一流的润滑专家。

RENOLIN ZAF B

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils

Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- and ash-free HM hydraulic oils complying with ISO 6743-4.

The most important features of RENOLIN ZAF B hydraulic oils are:

Good oxidation stability and good resistance to ageing
Powerful EP properties and very good wear protection
Excellent corrosion protection
Rapid air release and low foaming
Good demulsification characteristics
Good compatibility with sealing materials

Application:

RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings and circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils and metalworking fluids can take place.

RENOLIN ZAF		32 B	46 B	68 B
Hydraulic oil type
acc. to ISO 6743-4		HM 32	HM 46	HM 68
acc. to DIN 51 502		HLP 32	HLP 46	HLP 68
Lubricating oil type
acc. to ISO 6743-6		CKC 32	CKC 46	CKC 68
acc. to DIN 51 502		CLP 32	CLP 46	CLP 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	31.5	45	65.4	ASTM D 445
at 100 °C	mm²/s	5.3	6.7	8.4	ASTM D 445
Viscosity index		98	101	98	ASTM D 2270
Density at 15 °C	kg/l	0.878	0.878	0.885	ASTM D 1298
Flash point, Cleveland open cup	°C	215	230	230	ASTM D 92
Pour point	°C	-30	-27	-21	ASTM D 97
Neutralization number	mg KOH/g	0.3	0.3	0.3	ASTM D 974
Saponification number	mg KOH/g	1.3	1.3	1.3	ASTM D 94
Water content	% mass	not traceable	not traceable	not traceable	ASTM D 95
Insolubles	% mass	not traceable	not traceable	not traceable	DIN 51 592
Demulsification	min	10	10	15	DIN 51 599
Air release at 50 °C	min	3	8	7	ASTM D 3427
Foaming,
seq. I	ml	30/0	50/0	50/0	ASTM D 892 seq. I-III
seq. II	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
seq. III	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h	mg KOH/g	< 2	< 2	< 2	ASTM D 943
Brugger boundary friction test	N/mm²	38	DIN 51 347 (D)
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	120	120	120	IP 281
on vanes after 250 h	mg	30	30	30	IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,

RENOLIN ZAF D

Zinc and Ash-Free, Detergent Hydraulic Oils

Zinc and Ash-Free, Detergent Hydraulic Oils

Zinc- and ash-free hydraulic oils have steadily gained popularity over the last few years. In many cases the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic oils can contaminate other functional fluids.
RENOLIN ZAF D hydraulic oils are zinc- and ash-free hydraulic oils with good detergent properties. The detergent agents in these oils reduce the formation of residues and ageing by-products.
They are HM hydraulic oils in line with ISO 6743-4 but with additional detergent and dispersant characteristics.

The most important features of RENOLIN ZAF D hydraulic oils are:

Good oxidation stability and good resistance to ageing
Powerful EP properties and very good wear protection
Excellent corrosion protection
Rapid air release and low foaming
Good sludge transportation and cleaning properties
Good compatibility with sealing materials

Application:

RENOLIN ZAF D products are high-grade HM hydraulic oils in line with ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils in line with ISO 6743-6. RENOLIN ZAF D products contain additives which avoid the formation of residues and guarantee the functional reliability of machinery.

OLIN ZAF		32 D	46 D	68 D
Hydraulic oil type
acc. to ISO 6743-4		HM 32	HM 46	HM 68
acc. to DIN 51 502		HLPD 32	HLPD 46	HLPD 68
Lubricating oil type
acc. to ISO 6743-6		CKC 32	CKC 46	CKC 68
acc. to DIN 51 502		CLP 32	CLP 46	CLP 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	32	46	68	ASTM D 445
at 100 °C	mm²/s	5.4	6.9	8.6	ASTM D 445
Viscosity index		100	105	97	ASTM D 2270
Density at 15 °C	kg/l	0.878	0.882	0.884	ASTM D 1298
Flash point, Cleveland open cup	°C	210	230	230	ASTM D 92
Pour point	°C	-33	-27	-24	ASTM D 97
Neutralization number	mg KOH/g	0.35	0.35	0.35	ASTM D 974
Saponification number	mg KOH/g	1.1	1.1	1.1	ASTM D 94
Air release at 50 °C	min	3	4	7	ASTM D 3427
Foaming,
seq. I	ml	30/0	50/0	50/0	ASTM D 892 seq. I-III
seq. II	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
seq. III	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h	mg KOH/g	< 2	< 2	< 2	ASTM D 943
Brugger boundary friction test	N/mm²	38	38	38	DIN 51 347 (D)
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	<120	<120	<120	IP 281
on vanes after 250 h	mg	<30	<30	<30	IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change	%	7	6	5	DIN 53 521 together with DIN 53 505
change in Shore A hardness	Shore	-3	-3	-2	DIN 53 521 together with DIN 53 505

MRO消耗品、易耗品 > 化学消耗品 > 润滑油(脂)/工业用油(脂) > 齿轮油 >