深圳鑫盈科润滑油贸易有限公司成立于二零零六年，是一家从事工业润滑油销售的贸易公司。 2008年底公司非常荣幸成为了壳牌润滑油授权经销商。同时也相继成为埃克森美孚、福斯工业润滑油的授权经销商。产品包括:液压油、齿轮油、导轨油 、防锈油、 切削油、润滑脂、合成齿轮油、合成润滑脂、高温润滑脂、绝缘油、冷冻、空气压缩机油 、涡轮机油、燃气发电机油、矿山设备用油、钢铁厂油膜轴承及循环系统油、船舶系统油。 销售服务热线：13926530627蒋先生，电话0755-28027380。
为了更好地服务客户，在市区，公司拥有400平方米的营业场地。几年来，经过全体员工不懈努力，公司实现了巨大的飞跃，润滑油销量高速增长，现已发展成为本地区进口品牌润滑油最大的供应商，并在行业中赢得了极高的信誉和良好的口碑。
作为世界一流品牌的润滑油经销商，要想赢得客户的长期信赖，就必须拥有充足稳定的货源。公司在深圳中心区建有 2000 平方米的润滑油储存仓库，备货相当充足，常年库存保持在 6000 桶左右，其中180公斤的包装超过 2500 桶， 18 升的包装近 3500 桶。仓储设施齐全，有数十个大型的润滑油货架和两辆专用的装卸叉车。公司还拥有十辆送货汽车，能够按用户的要求及时将润滑油产品送至用户指定地点。
在润滑油产品的经营中，为了将专门化的技术服务带给用户，公司购进了数台国外进口的润滑油专用服务设备，如：德国HYDAC公司生产的润滑油在线检测仪，美国 PALL 公司生产的润滑油过滤加注小车、油液净化、便携式清洁度等级检测仪等设备，能分别为客户在润滑油使用中提供过滤加注、油水分离、现场 NAS 等级检测服务。我们愿以专业的技术服务将自己打造成一流的润滑专家。
| 齿轮油
|
It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions and spillages when handling hydraulic fluids lead to direct pollution of the surroundings and thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils and synthetic esters.
The PLANTOHYD S series of oils are based on synthetic esters. They represent an environmentally friendly alternative to mineral oil-based hydraulic oils and can be classified as HEES fluids according to ISO/CD 6743-4.
The advantages of PLANTOHYD S are:
- Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93)
- German Water Hazard Class WGK 0, i.e. generally not hazardous for water
- Non-toxic, physiologically harmless
- Free of heavy metals
- Good low-temperature characteristics
- Excellent resistance to ageing and oxidation
- Excellent viscosity-temperature behaviour because of their high natural VI
- Excellent anti-wear properties
- Extremely shear-stable
- Rapid air release
- Minimal foaming
- Insoluble in water
- Good demulsibility characteristics. Applicable at tank temperatures ranging from - 35 °C to + 90 °C
PLANTOHYD S products are fully compatible with all materials usually found in hydraulic systems. The base fluids used in these products are non-toxic. The fluids are free of heavy metals and chlorinated compounds.
Application:
PLANTOHYD S hydraulic oils can be used universally in all hydraulic and general lubricating systems. They are suitable for all mobile and stationary hydraulic systems. These products should always be used whenever there is a danger of soil or water pollution following a leak or spillage. The greatest potential for such occurrences are in the construction, water, agricultural and forestry industries. Approvals from a number of well-known manufacturers have been issued. The high viscosity index of PLANTOHYD S products give them multigrade characteristics.
We recommend that the miscibility and compatibility of these products with mineral oil-based hydraulic oils should be checked on a case-by-case basis. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as synthetic esters. In general, we recommend the use of stainless steel tanks. "Free" metals, e.g. tin from soldered joints or zinc from galvanized components should be avoided if possible. Filter systems should also be compatible with synthetic ester fluids.
The powerful cleaning effect of these fluids can dislodge large amounts of dirt and contaminants and this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOHYD S. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering or drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %. For ISO VG 10 to 22 fluids elastomer compatibility tests should be performed.
Our application engineers will be glad to advise you on:
- Experiences with these products
- Application possibilities 40 Material compatibility
- Change-over procedures
Typical data:
| PLANTOHYD | 10 S | 15 S | 22 S | 32 S | 46 S | 68 S | ||
| Hydraulic oil type acc. to ISO/CD 6743-4 and VDMA 24 568 | HEES 10 | HEES 15 | HEES 22 | HEES 32 | HEES 46 | HEES 68 | ||
| Characteristics | Unit | Test method | ||||||
| Colour | 3 | 3.5 | 4 | 1 | 0.5 | 1 | ASTM D 1500 | |
| Kinematic viscosity | ||||||||
| at 40 °C | mm²/s | 8.5 | 15.5 | 22.7 | 32.4 | 47.4 | 69 | ASTM D 445 |
| at 100 °C | mm²/s | 2.5 | 4 | 5.4 | 7.1 | 49.3 | 13 | ASTM D 445 |
| Viscosity index | 125 | 162 | 191 | 188 | 184 | 191 | ASTM D 2270 | |
| Density at 15 °C | kg/l | 0.93 | 0.926 | 0.926 | 0.921 | 0.921 | 0.923 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 198 | 270 | 167 | 246 | 290 | 304 | ASTM D 92 |
| Pour point | °C | < – 65 | – 51 | – 36 | – 39 | – 42 | – 39 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.8 | 1.2 | 1.3 | 1.2 | 1.2 | 1.8 | ASTM D 974 |
| Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 |
| Rust prevention | pass A | pass A | pass A | pass A | pass A | pass A | ASTM D 665 | |
| Ageing behaviour at 110 °C, increase in viscosity at 40 °C after 72 h | % | < 20 | < 20 | < 20 | < 20 | < 20 | < 20 | DIN 51 554-3 (modified) |
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | DIN 51 354-2 |
