深圳鑫盈科润滑油贸易有限公司成立于二零零六年，是一家从事工业润滑油销售的贸易公司。 2008年底公司非常荣幸成为了壳牌润滑油授权经销商。同时也相继成为埃克森美孚、福斯工业润滑油的授权经销商。产品包括:液压油、齿轮油、导轨油 、防锈油、 切削油、润滑脂、合成齿轮油、合成润滑脂、高温润滑脂、绝缘油、冷冻、空气压缩机油 、涡轮机油、燃气发电机油、矿山设备用油、钢铁厂油膜轴承及循环系统油、船舶系统油。 销售服务热线：13926530627蒋先生，电话0755-28027380。
为了更好地服务客户，在市区，公司拥有400平方米的营业场地。几年来，经过全体员工不懈努力，公司实现了巨大的飞跃，润滑油销量高速增长，现已发展成为本地区进口品牌润滑油最大的供应商，并在行业中赢得了极高的信誉和良好的口碑。

作为世界一流品牌的润滑油经销商，要想赢得客户的长期信赖，就必须拥有充足稳定的货源。公司在深圳中心区建有  2000 平方米的润滑油储存仓库，备货相当充足，常年库存保持在 6000 桶左右，其中180公斤的包装超过 2500 桶，  18 升的包装近 3500 桶。仓储设施齐全，有数十个大型的润滑油货架和两辆专用的装卸叉车。公司还拥有十辆送货汽车，能够按用户的要求及时将润滑油产品送至用户指定地点。

在润滑油产品的经营中，为了将专门化的技术服务带给用户，公司购进了数台国外进口的润滑油专用服务设备，如：德国HYDAC公司生产的润滑油在线检测仪，美国  PALL 公司生产的润滑油过滤加注小车、油液净化、便携式清洁度等级检测仪等设备，能分别为客户在润滑油使用中提供过滤加注、油水分离、现场  NAS  等级检测服务。我们愿以专业的技术服务将自己打造成一流的润滑专家。 　　

High Performance, High Viscosity index HV Hydraulic Oils

The function of hydraulic oil pumps can often be improved irrespective of the machinery driven because they are isolated from the variables found at the workplace. A major factor in the performance of hydraulic system is the fluid medium. This absorbs a relatively large amount of energy when the pump is started-up because of the high internal resistance of hydraulic oil. Excessive friction also occurs if the oil's viscosity is too low and this leads to wear. Such conditions can cause breakdowns. FUCHS has developed a series of so-called "low friction" oils which reduce energy consumption and wear when hydraulic pumps are started-up. These products also improve reliability and eliminate breakdowns caused by insufficient or excess viscosity, both problems associated with normal HM hydraulic oils.

The RENOLIN B HVI series of oils offer the following advantages:

• Excellent viscosity-temperature behaviour 
  
• Good EP properties and thus protection against wear 
  
• Excellent shear stability 
  
• Excellent oxidation stability and resistance to ageing 
  
• Excellent corrosion protection 
  
• Rapid air release and low foaming 
  
• Good demulsification characteristics 
  
• Good elastomer compatibility

Application:

The RENOLIN B HVI series of oils are not just high grade hydraulic oils but also excellent lubricating oils which can be used for numerous applications.

They are particularly suitable for use in hydraulic equipment operating over a wide temperature range. This means for applications requiring a low start-up viscosity but also a stable protecting lubricating film at high operating temperatures. RENOLIN B HVI series of oils contribute to a rationalization by reducing the variety of hydraulic oils in use.

RENOLIN		B 15 HVI	B 32 HVI	B 46 HVI
Hydraulic oil type
acc. to ISO 6743-4¹		HV 15	HV 32	HV 46
acc. to DIN 51 502¹		HVLP 15	HVLP 32	HVLP 46
Characteristics	Unit				Test method
Colour		0.5	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	15	32	46	ASTM D 445
at 100 °C	mm²/s	3.8	6.8	8.9	ASTM D 445
Viscosity index		153	180	180	ASTM D 2270
Density at 15 °C	kg/l	0.855	0.876	0.87	ASTM D 1298
Flash point, Cleveland open cup	°C	180	178	178	ASTM D 92
Pour point	°C	- 36	- 42	- 33	ASTM D 97
Neutralization number	mg KOH/g	0.3	0.3	0.3	ASTM D 974
Saponification number	mg KOH/g	0.6	0.6	0.6	ASTM D 94
Oxide ash	% mass	0.1	0.1	0.1	ASTM D 482
Water content	% mass	not traceable	not traceable	not traceable	ASTM D 95
Insolubles	% mass	not traceable	not traceable	not traceable	DIN 51 592
Demulsification	min	15	15	18	DIN 51 599
Air release at 50 °C	min	1	2	3	ASTM D 3427
Foaming,
seq. I	ml	10/0	20/0	40/0	ASTM D 892 seq. I-III
seq. II	ml	30/0	20/0	20/0	ASTM D 892 seq. I-III
seq. III	ml	10/0	60/0	50/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A24	1a-100A24	1a-100A24	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
Shear stability after 250 cycles, viscosity decrease at 100 °C	%	2	5	7	IP 294
Ageing behaviour, increase in neutralization number after 1000 h	mg KOH/g	< 2	< 2	< 2	ASTM D 943
FZG mechanical gear rig test	load stage	12	12	12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	< 120	< 120	< 120	IP 281
on vanes after 250 h	mg	< 30	< 30	< 30	IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change	%	15	11	0	DIN 53 521 together with DIN 53 505
change in Shore A hardness	Shore	– 5	– 5	– 5	DIN 53 521 together with DIN 53 505