深圳鑫盈科润滑油贸易有限公司成立于二零零六年，是一家从事工业润滑油销售的贸易公司。 2008年底公司非常荣幸成为了壳牌润滑油授权经销商。同时也相继成为埃克森美孚、福斯工业润滑油的授权经销商。产品包括:液压油、齿轮油、导轨油 、防锈油、 切削油、润滑脂、合成齿轮油、合成润滑脂、高温润滑脂、绝缘油、冷冻、空气压缩机油 、涡轮机油、燃气发电机油、矿山设备用油、钢铁厂油膜轴承及循环系统油、船舶系统油。 销售服务热线：13926530627蒋先生，电话0755-28027380。
为了更好地服务客户，在市区，公司拥有400平方米的营业场地。几年来，经过全体员工不懈努力，公司实现了巨大的飞跃，润滑油销量高速增长，现已发展成为本地区进口品牌润滑油最大的供应商，并在行业中赢得了极高的信誉和良好的口碑。
作为世界一流品牌的润滑油经销商，要想赢得客户的长期信赖，就必须拥有充足稳定的货源。公司在深圳中心区建有 2000 平方米的润滑油储存仓库，备货相当充足，常年库存保持在 6000 桶左右，其中180公斤的包装超过 2500 桶， 18 升的包装近 3500 桶。仓储设施齐全，有数十个大型的润滑油货架和两辆专用的装卸叉车。公司还拥有十辆送货汽车，能够按用户的要求及时将润滑油产品送至用户指定地点。
在润滑油产品的经营中，为了将专门化的技术服务带给用户，公司购进了数台国外进口的润滑油专用服务设备，如：德国HYDAC公司生产的润滑油在线检测仪，美国 PALL 公司生产的润滑油过滤加注小车、油液净化、便携式清洁度等级检测仪等设备，能分别为客户在润滑油使用中提供过滤加注、油水分离、现场 NAS 等级检测服务。我们愿以专业的技术服务将自己打造成一流的润滑专家。
| 齿轮油
|
RENOLIN AW
Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils
Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils
Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- and ash-free HM hydraulic oils complying with ISO 6743-4.
The most important features of RENOLIN ZAF B hydraulic oils are:
- Good oxidation stability and good resistance to ageing
- Powerful EP properties and very good wear protection
- Excellent corrosion protection
- Rapid air release and low foaming
- Good demulsification characteristics
- Good compatibility with sealing materials
Application:
RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings and circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils and metalworking fluids can take place.
RENOLIN AW |
| 32 | 46 | 68 |
|
Hydraulic oil type |
|
|
|
|
|
acc. to ISO 6743-4 |
| HM 32 | HM 46 | HM 68 |
|
acc. to DIN 51 502 |
| HLP 32 | HLP 46 | HLP 68 |
|
Lubricating oil type |
|
|
|
|
|
acc. to ISO 6743-6 |
| CKC 32 | CKC 46 | CKC 68 |
|
acc. to DIN 51 502 |
| CLP 32 | CLP 46 | CLP 68 |
|
Characteristics | Unit |
|
|
| Test method |
Colour |
| 1 | 1 | 1 | ASTM D 1500 |
Kinematic viscosity |
|
|
|
|
|
at 40 °C | mm²/s | 31.5 | 45 | 65.4 | ASTM D 445 |
at 100 °C | mm²/s | 5.3 | 6.7 | 8.4 | ASTM D 445 |
Viscosity index |
| 98 | 101 | 98 | ASTM D 2270 |
Density at 15 °C | kg/l | 0.878 | 0.878 | 0.885 | ASTM D 1298 |
Flash point, Cleveland open cup | °C | 215 | 230 | 230 | ASTM D 92 |
Pour point | °C | -30 | -27 | -21 | ASTM D 97 |
Neutralization number | mg KOH/g | 0.3 | 0.3 | 0.3 | ASTM D 974 |
Saponification number | mg KOH/g | 1.3 | 1.3 | 1.3 | ASTM D 94 |
Water content | % mass | not traceable | not traceable | not traceable | ASTM D 95 |
Insolubles | % mass | not traceable | not traceable | not traceable | DIN 51 592 |
Demulsification | min | 10 | 10 | 15 | DIN 51 599 |
Air release at 50 °C | min | 3 | 8 | 7 | ASTM D 3427 |
Foaming, |
|
|
|
|
|
seq. I | ml | 30/0 | 50/0 | 50/0 | ASTM D 892 seq. I-III |
seq. II | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
seq. III | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 |
Rust prevention |
| pass A | pass A | pass A | ASTM D 665 |
Ageing behaviour, increase in neutralization number after 1000 h | mg KOH/g | < 2 | < 2 | < 2 | ASTM D 943 |
Brugger boundary friction test | N/mm² | 38 | DIN 51 347 (D) |
|
|
FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | DIN 51 354-2 |
Vickers vane pump test, loss of mass |
|
|
|
|
|
on ring | mg | 120 | 120 | 120 | IP 281 |
on vanes after 250 h | mg | 30 | 30 | 30 | IP 281 |
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C+/– 1 °C after 7 days +/– 2 hours, |
|
|
|
|
|
