本公司长期代理经销美国RTP各种型号ABS塑胶原料，柜货订购，原厂原包，货源稳定，有质量保证，可到仓库看货，可送货上门，可开增值税发票，可提供SGS，UL，MSDS，ROHS，COA等物性表,并能提供相关的加工技术指导。量大从优，欢迎广大新老客户来电洽谈合作！电话：15999818672 黄先生
![[RTP Company]](http://www.rtpcompany.com/info/data/images/logo300.gif ) | Product Data Sheet &
General Processing Conditions
EMI 662
Acrylonitrile Butadiene Styrene (ABS)
Stainless Steel Fiber
Electrically Conductive
EMI/RFI/ESD Protection
|
PROPERTIES & AVERAGE VALUES OF INJECTION MOLDED SPECIMENS |
PERMANENCE | English | | SI Metric | | ASTM
TEST | | | | Primary Additive | 15 % | | 15 % | | | | Specific Gravity | 1.17 | | 1.17 | | D 792 | | Molding Shrinkage | | | 1/8 in (3.2 mm) section | 0.0040 - 0.0060 in/in | | 0.40 - 0.60 % | | D 955 |
MECHANICAL | | | | Impact Strength, Izod | | | notched 1/8 in (3.2 mm) section | 1.0 ft-lbs/in | | 53 J/m | | D 256 | | unnotched 1/8 in (3.2 mm) section | 3.0 ft-lbs/in | | 160 J/m | | D 4812 | | Tensile Strength | 5000 psi | | 34 MPa | | D 638 | | Tensile Elongation | 2.0 - 4.0 % | | 2.0 - 4.0 % | | D 638 | | Tensile Modulus | 0.35 x 10^6 psi | | 2413 MPa | | D 638 | | Flexural Strength | 9000 psi | | 62 MPa | | D 790 | | Flexural Modulus | 0.35 x 10^6 psi | | 2413 MPa | | D 790 |
ELECTRICAL | | | | Volume Resistivity | < 1 ohm.cm | | < 1 ohm.cm | | D 257 | | Surface Resistivity | < 1E4 ohm/sq | | < 1E4 ohm/sq | | D 257
ESD STM11.11 | | Surface Resistance | < 1E3 ohm | | < 1E3 ohm | | ESD STM11.11 | | Static Decay | | | MIL-PRF-81705D, 5kV to 50 V, 12% RH | < 2.00 s | | < 2.00 s | | FTMS101C
4046.1 | | | | PROPERTY NOTES | | | Data herein is typical and not to be construed as specifications.
Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect properties. |
GENERAL PROCESSING FOR INJECTION MOLDING | | | English | | SI Metric | | | | | | Injection Pressure | 10000 - 15000 psi | | 69 - 103 MPa | | | | Melt Temperature | 400 - 475 °F | | 204 - 246 °C | | | | Mold Temperature | 150 - 180 °F | | 66 - 82 °C | | | | Drying | 2 hrs @ 180 °F | | 2 hrs @ 82 °C | | | | Moisture Content | 0.10 % | | 0.10 % | | | | Dew Point | 0 °F | | -18 °C | | |
PROCESSING NOTES | | | Use a reverse barrel profile. Remove hopper magnets. Allow 4 - 5 shots to properly disperse the conductive fibers. The surface finish should have a silver streaking appearance, not clumps.
Remove hopper magnets.
Desiccant Type Dryer Required.
| |
18 Jan 2005 LCR This information is intended to be used only as a guideline for designers and processors of modified thermoplastics. Because design and processing is complex, a set solution will not solve all problems. Observation on a “trial and error” basis may be required to achieve desired results. Data are obtained from specimens molded under carefully controlled conditions from representative samples of the compound described herein. Properties may be materially affected by molding techniques applied and by the size and shape of the item molded. No assurance can be implied that all molded articles will have the same properties as those listed. No information supplied by RTP Company constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation for use, based upon RTP Company or other customer experience. RTP Company makes no warranties, expressed or implied, concerning the suitability or fitness of any of its products for any particular purpose. It is the responsibility of the customer to determine that the product is safe, lawful and technically suitable for the intended use. The disclosure of information herein is not a license to operate under, or a recommendation to infringe any patents. RTP COMPANY • 580 EAST FRONT STREET • WINONA, MN 55987 • 507-454-6900 |
