7742 Electrical Safety Compliace Analyzer (40A)

Opt.731 GPIB Interface

Opt.732 Printer Port Interface

Opt.736 Scanner 8W+8G

Opt.738 RUN Test Module

Opt.739 RUN Test + LLT Module

Opt.751 Multi-function Interface Card

Multi-function Interface Card with USB-A type + Bar Code PS/2 type + RS232/RS485 Interface

Opt.758 Ethernet Card

Include Bar-Code I/P, Ethernet, and RS232 port.

Opt.763 USB & RS232 PC Control Card

1101 高压测试线

Molded Male to Alligator Clip. For applying the hipot test voltage to the DUT.

1105 高压连接线

Molded Male, White, Both Ends. It is used to interconnect between Matrix Scanners and hipot tester.

1109 高压输出连接线

Molded Male, White, to Open End. It allows hipot test voltage output connect to the DUT.

1111 扫描控制线

25-pin D type, Male to Female. It is used to connect to Matrix Scanner .

1120 LLT L/N 连接线

Link to DUT Line or Neutral.

1123 高压连接线

Molded Male, White, to Ring Lug.

1130 RS232 连接线

1137 接地阻抗电流测试线(40A)

2-Wire (High Current & Voltage Sensor) to Alligator Clip, Red.

1138 接地阻抗电流回路线(40A)

2-Wire (High Current & Voltage Sensor) to Alligator Clip, Black.

1147 接地阻抗电流回路线(40A)

1217 耐压/接地阻抗信号控制连接线

9-pin D type, Male to Female, with Interlock Disable key Ground Bond Input Signal connect to Hipot Output Signal.

1219 耐压/接地阻抗信号控制连接线

9-pin D type, Male to Female, with Interlock Disable key. For Safety link test.

1302 高压测试棒

ON/OFF Switch button on the Rod to initiate hipot output with Interlock Disable function.

1306 高压测试棒

For applying the hipot test voltage to the DUT.

1316 高压测试枪

1317 接地阻抗测试棒(40A)

A fixed tip 4 wire probe used with our 40 Amp Ground Bond testers. It allows easy contact with grounding points of the device under test.

1505 Interlock Disable Key

Interlock Function at rear panel(Signal Input).

1928 远程控制盒

With Interlock Disable function.

1929 远程控制盒(含LED显示)

With Interlock Disable function.

1933 点检治具盒