【Micro Redundant】M1R2-5500G0H
500W
Server ,Workstation ,Storage System ,IPC
295x106x41.3(mm)
11.61x4.17x1.63(inch)
VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：8A (RMS) FOR 115 VAC / 4A (RMS) FOR 230 VAC
INRUSH CURRENT：15A MAX. FOR 115 VAC / 30A MAX. FOR 230 VAC (at 25 degrees ambient cold start for each power unit)
PFC: Up to the target of 95% @115V, full load
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0 | 22 | ±5% | ±1% | 50mV |
| +12V | 2 | 41 | ±5% | ±1% | 120mV |
| +3.3V | 0 | 22 | ±5% | ±1% | 50mV |
| -12V | 0 | 0.5 | ±5% | ±1% | 120mV |
| +5VSB | 0.1 | 3 | ±5% | ±1% | 50mV |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
* +5V AND +3.3V Max. POWER: 150W
* TOTAL POWER: 500W (MAX) * TEMPERATURE RANGE：OPERATING 0℃～50℃, STORAGE -20℃~80℃
* HOLD UP TIME：WHEN POWER SHUTDOWN DC OUTPUT 12V MUST BE MAINTAIN 9mS IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* THE MAXIMUM POWER SUPPLY SYSTEM EFFICIENCY SHALL BE 88%, MEASURED AT NOMINAL INPUT VOLTAGE 230V AND FULL LOADING
* LEAKAGE CURRENT: 3.5mA. MAX. AT NOMINAL VOLTAGE 250VAC
* REMOTE ON/OFF CONTROL
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS
* OVER POWER PROTECTION：110～150% MAX (PER POWER MODULE)
* OVER VOLTAGE PROTECTION: +5V→5.7~6.5V, +3.3V→3.7~4.1V, +12V→12.8~13.9V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
* OVER CURRENT PROTECTION: +12V:110~150% (PER POWER MODULE)
* SAFETY: MEET UL&CUL, TUV, CCC
* WARNING METHOD: AUDIO ALARM(BUZZER SOUND, RESETABLE), FALUT LED, TTL
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
