Tulsion® T-46 ISO-9001/ISO-14001/OHSAS-18000
STRONG ACID CATION EXCHANGE RESIN NUCLEAR GRADE
Tulsion® T-46 FM is a specially developed premium grade strongly acidic cation exchange resin containing nuclear sulphonic acid groups with excellent physical and chemical stability for use in the nuclear industry.
Tulsion® T-46 FM is primarily used for purification of reactor coolant water and moderator in nuclear power station plants to keep corrosion products to the minimum and thus protect the heat transfer surfaces from scaling and corrosion.
Tulsion® T-46 FM is supplied in hydrogen, lithium and ammonium forms to facilitate control of the pH of coolant water at a value that would result in practically negligible attach on metal surface by the coolant water.
Tulsion® T-46 FM is manufactured under the most stringent quality controls to ensure minimal metallic impurities esulting in the highest purity of the ionic form supplied.
TYPICAL CHARACTERISTICS： Tulsion T-46
Matrix structure : Polystyrene copolymer
Functional group : Nuclear Sulphonic
Physical form : Moist spherical beads
Ionic form : Hydrogen/Lithium
Screen size US mesh : 16 to50
Particle size (minm. 95%) : 0.3 to1.2mm
Moisture content : 52± 3% H form.50± 3% Li form
Backwash settled density : 800 to 840 g/l (50 - 52 lbs/cft) (H+)
Thermal stability : 250 °F / 120 °C
pH range : 0 to 14
Fines content : Less than 0.5% through 50 USS
Bead strength : Not less than 500 g/bead
Solubility : Insoluble in all common solvents
Total exchange capacity : 1.8 meq/ml for H+ (min. 99% of its exchange sites in the form supplied)
操作条件（OPERATION CONDITIONS）： Tulsion T-42 UPS
最小树脂床高度(Bed depth , mini mm) 600
最大(Service flow rate ,Maxi ) 120 m3/hr/ m3
逆洗水量(Backwash flow rate) 9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion) 40 to 75%
再生药剂(Regenerant ) HCl, H2SO4 for H+ form,
再生药剂用量(Regeneration levels. ) 30 to 120 gms HCl/ lit.
40 to 250 gms H2SO4/ lit.
再生药剂浓度(Regeneration concentration) 3 - 5% HCl, 1.5 to 3% H2SO4
最少通再生药剂时间(Regeneration Contact time, mini) 20 min.
再生流量(Regeneration flow rate ) 5 to 16 m3/hr/ m3
Regeneration slow rinse 2 BV mini.
快洗用水(Fast Rinse ) Service flow rate.
快洗水量(Fast Rinse Volume) 4 to 6 BV
TESTING：
The sampling and testing of ion exchange resins is done as per standard testing procedures, namely
ASTMD-2187 and IS-7330, 1998.
PACKING：
Super sacks 1000 liters Super sacks 35 cft
MS drums 180 liters Fiber drums 7 cft
HDPE lined bags 25 liters HDPE lined bags 1 cft
For Handling, Safety and Storage requirements please refer to the inpidual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These data are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are as per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on own processing equipment.
Tulsion® A-33
Crack-free Strong Base Anion Exchange Resin Type I- Nuclear Grade
Tulsion® A-33 is a specially developed, premium grade, strongly basic anion exchange resin based on polystyrene matrix containing quaternary ammonium Type I groups with excellent physical and chemical stability for use in the nuclear industry. Tulsion A-33 is regenerated in hydroxide form ensuring that not more than 3% of exchange sites are in chloride form.
Tulsion® A-33 is primarily used for purification of reactor coolant water and moderator in nuclear power station plants to keep corrosion products to the minimum and thus protecting the heat transfer surfaces from scaling and corrosion.
Tulsion® A-33 has excellent capacity for removal of boric acid. Tulsion A-33 is manufactured under the most stringent quality controls to ensure minimal metallic impurities resulting in the highest purity of the ionic form supplied.
TYPICAL CHARACTERISTICS： Tulsion A-33
Type : Strong base anion exchange resin
Matrix structure : Polystyrene copolymer
Functional group : Quaternary Ammonium Type I
Physical form : Moist Powder form
Ionic form : Hydroxide
Screen size US mesh : 16 to 50
Particle size (minm. 95%) : 1.2 to 0.3mm
Uniformity coefficient : 1.75 max
Backwash settled density : 42 to 44 lbs/ft3 (670 to 710 g/l)
Bead strength : Not less than 250g/bead average by Chatillion Test
Swelling (approx.) : Cl-to OH- 20%
Moisture contents (approx) : 70 ± 3 %
Thermal stability : 80 °C
pH range : 0 to 14
Solubility : Insoluble in all common solvents
Total exchange capacity : 1.0 meq/gm(minm.90% of its exchange sites in hydroxide form and a max. of 3% in chloride form)
TESTING：
The sampling and testing of ion exchange resins is done as per standard testing procedures, namely
ASTMD-2187 and IS-7330, 1998.
PACKING：
Super sacks 1000 liters Super sacks 35 cft
MS drums 180 liters Fiber drums 7 cft
HDPE lined bags 25 liters HDPE lined bags 1 cft
For Handling, Safety and Storage requirements please refer to the inpidual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These data are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are as per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on own processing equipment.
