| ASTM E162-2012a Standard Test Method for Surface Flammability of
Materials Using a Radiant Heat Energy Source |
| |
| Test Clause | Requirement |
| Conditioning | Predry specimens for 24 h at
140°F (60°C) and then condition
to equilibrium (constant weight) at an ambient temperature of 73 ± 5°F (23 ± 3°C) and a relative humidity of 50 ± 5 %. |
| | |
| Sample Required: | |
| 8
pieces, 6’'(152mm) wide by 18”(457mm) long by maximum 1” (25.4mm) thickness，8 片152mm×457mm×实际厚度（一般不大于25.4mm）。 |
| Note: 1）试样数量最少需要4组，由于标准要求最少要4组有效的试验结果，所以为了安全起见，最好提供8组。2） Materials intended to be applied
to a substrate shall be tested on that substrate.对于在实际应用中有确定的应用基材，测试中应该应用到这种指定的基材上。3）Flexible
materials shall be cut to 10 by 22-in. (255 by 560-mm)，对于软质材料，提供尺寸为255 by 560-mm。4）对于其他特殊情况，单独咨询 |
| |
